faculty Profile

• Ph.D – 2009 – JNT University, Hyderabad
• M.S.(Technological Operations) – 1993 – BITS, Pilani, Rajasthan
• B.E (Production) – 1986 – Anna University
• Diploma(Mechanical) – 1982 – (Directorate Of Technical Education)

• Sri Venkateswara College of Engineering, Pennalur Professor 3/6/2013 to till date.
• Sri Venkateswara College of Engineering, Pennalur Professor and HOD Automobile Engineering 17-4-2009 to 2/6/2013
• Sri Venkateswara College of Engineering, Pennalur Professor 1-12-2009
• Sri Venkateswara College of Engineering, Pennalur Assistant Professor 01-04-1994 to 30-11-2009
• Sri Venkateswara College of Engineering, Pennalur Lecturer 01-4-1991 to 31-03-1994
• Sri Venkateswara College of Engineering, , Pennalur Associate Lecturer 2-09-1987 to 31-03-1990

Theory Subjects Handled

• Process Planning and cost estimation
• Machine Drawing
• Engineering Metrology
• Automobile Engineering
• Kinematics of Machines
• Mechanics of Machines
• Manufacturing Technology -I
• Manufacturing Technology -II
• Dynamics of Machinery
• Basic Mechanical Engineering
• Production Drawing cost Estimation
• Production Technology
• Theory Subject Handling
• Automobile Engineering

Laboratory

• Basic work shop practice
• Manufacturing Technology I & II
• Fluid Mechanics Lab
• Special Purpose machine shop

Funded Projects

• Acted as a Principal investigator and completed a funded project of Rs 3.5 lakhs from AICTE under RPS scheme for three years (2009-2012)
• Acted as a coordinator and completed a consultancy work with Unitta Gates India limited for an amount of Rs5.3 lakhs.
• Received a grant of Rs 10,00,000/ from AICTE under MODROB scheme as a Chief coordinator for a project titled, Combustion characteristics of CRDI multi cylinder CI engine fuelled with bio- diesel blend for a period of 0ne year (2013-2014)
• Received a grant of Rs 18,00,000 from AICTE  RPS scheme as a Principal investigator for a project titled “ANN Modelling of pulsed metal inert gas (p-MIG) welding of Magnesium Alloy plates” for a period of three years (2013-2016)
• Ph.D Scholars under guidance
• N.Janaki Manohar – Reverse Engineering – Received confirmation
• V.Sridharan – Machinability of polymer composites received confirmation
• S.Muniraj – Machinability of micro alloy Received Confirmation
• M. Naresh babu – Unconventional machining process  Received confirmation
• B. Sravan Kumar – Composite materials – doing course work
• Projects Guided
• Design and Fabrication of Drill Jig for Cycle Pedal Arm-1989
• Design and Fabrication of special milling attachment for Radial Drilling Machine-1989
• Design and Fabrication of Fly press-1990
• Design and Fabrication of Pin forming Machine-1992
• Automatic Feeding Mechanism for Claw Blanking Machine-1995
• Endurance testing equipment for radiator cap-1995
• Integrated Maintenance Management systems-1996
• Design of conveyor for front axle assembly-1996
• Bearing test Rig for AUTOLEC Industries Ltd-1997
• Achieving Economic Broach Life-1998
• Study on Control of component distortion in heat treatment process-1998
• Design and Fabrication of Special attachment to cut Polynomial faces in lathe-1999
• Design and Fabrication of special purpose fixture for Hydraulic Punch unit-2001
• Design and Fabrication of FIT – UP Special purpose fixture for rear beam NI Model-2001
• Influence of surface finish on the fatique life of plain carbon steel specimens-2001
• Assembly of bearing on the shaft using Low Cost Automation-2002
• Automation of honing machine-2003
• Designed and combining Thermic Fluid Heaters for energy Conservation at IJL Ltd-2003.
• Prediction of quality surface finish of OHNS material by using different cutting tools under different cutting parameters-2004
• Study on Tantalum Nitride (TaN) thin film hard coatings by DC Magnetron sputtering technique-2005
• Study on machining behaviour of fine grade PCD inserts on Al-SiC (20p) Metal Matrix Composites-2006
• Correlating of machining parameters of Al-SiC, MMC using Artificial Neural Networks-2006.
• Machinability study of Titanium alloy (Ti-6Al-4V) using different cutting inserts-2007
• Application of ANN to predict the tool wears of PCD 1600 grade on machining Al-SiC composites-2007.
• Performance evalution of pheripheral milling on 3% carbon content on peralitic cast Iron-2008.
• Design of a work handling device for the manipulator of an EMU train-2009
• Machinability behaviour of K 20 carbide and PCD inserts on turning GFRP composites-2009

Publications

• International Journals 28
• National Journals 12
• ASME/ASM papers 05
• Other International Conferences 25
• National Conferences 17

International Journal

• Naresh Babu, Muthukrishnan, “Investigation of multiple process parameters in abrasive water jet machining of tiles”, in Journal of the Chinese Institute of Engineers, Vol. 38 (6)-pp. 692-700, 2015.”
• Nambi Muthukrishnan, Naresh babu, “Multi response analysis in Abrasve Water Jet Machining process on AA6351”, Manufacturing, Materials and Mechanical Engineering (IJMMME), 4(4),38-46, Oct.-Dec. 2014.
• N. Naresh babu, N.Muthukrishnan “Investigation on Surface Roughness in Abrasive Water-Jet Machining by the Response Surface Method” Materials and Manufacturing Processes, 29: 1422-1428, 2014.
• T.S.Mahesh Babu, P.S.Ramkumar, N.Muthukrishnan, Optimization of Machining Parameters on Turning of Hybrid Metal Matrix Composite International journal of Applied Mechanics and Materials, Vol. 315 (2013) Pp 113-116.
• T.S.Mahesh babu, M.S.Aldrin Sugin, N.Muthukrishnan, Investigation on the characteristics of surface quality on machining of Hybrid metal matrix composites (Al-SiC- B4C), Procedia Engineering Vol.38, 2012. pp 2617-2624.
• Veerapuram Sridharan, Nambi Muthukrishnan, Optimization of Machinability of Polyester/Modified Jute Fabric Composite Using Grey Relational Analysis (GRA),Proceedia Engineering Vol.64. pp 1003-1012. 2013.
• N.Muthukrishnan, Application of artificial Neural Network (ANN) in machining analysis of Al-SiC Metal Matrix composites by PCD 1600 inserts, International journal of Contemporary science Engineering and Technology, Vol.3. N0.1-2, pp 21-31, 2012.
• N.Muthukrishnan, Machinability behavior of PCD 1500 Grdae inserts on Al/SiC/B4C Hybrid Metal Matrix Composites, International journal of Contemporary science Engineering and Technology, Vol.3. N0.1-2, pp 33-44, 2012.
• N.Muthukrishnan, T.S .Mahesh babu, An investigation of PCD 1600 grade insert on Machining Al/SiC/B4C Hybrid composites based on Taguchi Techniques Accepted in Journal of the Balkan Tribological Association (In press)
• N.Muthu Krishnan, S.Muniraj,  Optimization of cutting parameters on Machining Micro Alloy steel (MAS 38 MnSiVS5) by Desirability Analysis accepted in Journal of the Balkan Tribological Association (In press)
• S. Muniraj and N. Muthukrishnan, Experimental Investigations on Machining Micro Alloy Steel (MAS 38MnSiVS5)Using K 20 Multi Coated Carbide Insert International journal of Applied Mechanics and Materials, Vol. 591 (2014) Pp 15-18.
• N.Muthukrishnan, T.S. Maheshbabub and R.Ramanujam Fabrication and turning of Al/SiC/B4C hybrid metal matrix composites optimization using desirability analysis Journal of the Chinese Institute of Industrial Engineers, Vol.29.Issue 8, 2012, pp 515-525.
• N.Muthukrishnan,M.Chandrasekaran, Estimation of optimal process parameters in Abrasive water jet machining of AISI 202 using Grey relational Analysis and Simulated annealing, multidisciplinary wulfenia journal, Vol.19.No.12. pp 408-425.
• N.Muthukrishnan, Machinability behavior of PCD 1600 Grade insert on machining Al-SiC/B4C Hybrid Composites, multidisciplinary wulfenia journal, Vol.20.No.1. pp 41-59.2012.
• N.Muthukrishnan, M.Murugan, K.Prahlada Rao, “An Investigation on machinability of Al/SiC Metal Matrix Composites using PCD inserts”, International Journal of Advanced Manufacturing Technology
• N.Muthukrishnan, M.Murugan, K.Prahlada Rao, “Machinability Issues in turning of Al/SiC (10p) Metal Matrix Composites, “the International Journal of Advanced Manufacturing Technology”
• N.Muthukrishnan, J.Paulo Davim, Optimization of machining parameters of Al-SiC  MMC with ANOVA and ANN analysis, International Journal of Material Processing Technology”,Vol 209, issue 1, 2009, Pp 225-232
• K.Palanikumar, N.Muthukrishnan,K.S Hariprasad, “Surface roughness parameters optimization in machining A356/SiC/20p Metal Matrix Composites by PCD tool using Response surface Methodology and desirability function”, International Journal of machining science and technology Vol 12, issue 4, 2008, Pp 529-545.
• N.Muthukrishnan, J.Paulo Davim, An Investigation on Effect of Workpiece Reinforcement Percentage on Machinability of Al-SiC Metal Matrix Composites, International Journal of materials and Product technology
• R.Ramanujam,R.Raju, N.Muthukrishnan,  Taguchi Multi  machining Characteristics Optimization in turning of Al -15% SiC p Composites using Desirability function Analysis International Journal of Studies on Manufacturing , Vol. 1-2010, Issue 2-3, Pp 120-125
• R.Ramanujam, N.Muthukrishnan, R.Raju,Optimization of cutting parameters for turning Al-SiC (10p) MMC using ANOVA and Grey relational analysis International journal of precision Engineering and manufacturing,Vol.12.No.4,Pp 651-656
• N.Muthukrishnan,Paulo davim, Influence of Coolant In Machinability of Titanium Alloy (Ti-6al- 4v)Journal of Surface Engineered Materials and Advanced Technology, 2011,1,9-14 doi:10.4236/jsemat.2011.11002.
• R.Ramanujam, R.Raju, N.Muthukrishnan,Optimization of Machining Parameters for turning (10p) MMC using Tauguchi Grey relational analysis Accepted for publication in an International Journal of Industrial Engineering: Theory, Applications and Practice
• K.Kaarmuhilan,S.Karthika, N.Muthu Krishnan, Performance Evaluation of PCD 1300 and 1500 Grade inserts on Turning A356 alloy with 20% Reinforcement of SiC Particles International journal of Applied Mechanics and Materials, Vol. 110-116 (2012) Pp 1855-1861.
• A.Mahamani, N. Muthukrishnan , V.Anandakrishnan, Determination of optimum parameters for multi-performance characteristic in turning of Al 6061-6% ZrB2 in-situ Metal Matrix Composite using grey relational analysis Accepted for publication in International journal of Materials, Manufacturing and Mechanical Engineering (IJMMME), 2(1), 11-29, January-March 2012, 11.
• T.S.Maheshbabu, N.Muthukrishnan, Machinability behaviour of PCD 1600 grade inserts on Turning Al/SiC/B4C Hybrid Metal Matrix Composites, International Journal of Engineering Research and Applications ,Vol.2, Issue 3, 2012, pp 1174-1180.
• T.S.Maheshbabu, N.Muthukrishnan, An experimental Investigation of Turning Al/SiC/B4C Hybrid Metal matrix Composites using ANOVA analysis, Scholarly journal of Engineering Research, Vol.I(2) pp. 25-31, 2012.
• National Journals
• T S Mahesh babu, N. Muthu Krishnan, and T. Sasimurugan, An Investigation on Surface Roughness in Turning Hybrid MMC (Al/SiCp/B4Cp) by Taguchi Experimental Technique and S/N-ANOVA Analysis, Proc Indian national Sci Acad 79 No. 3(A) September 2013 pp 1-6.
• Mahesh Babu T.S, Muthukrishnan N, Fabrication of hybrid MMC (Al-SiC-B4C) and Evaluation of Mechanical and Machinability characteristics
• N.Muthukrishnan, Experimental Investigation of optimum parameters for turning of Al6061  10% ZrB2 Metal Matrix composites using desirability analysis, i-managers journal on future Engineering and Technology, Vol.7. No.3. (Feb-April 2012.pp 17-25.
• N.Muthukrishnan, Machinability studies on fabricated Al SiC-B4C Hybrid Metal Matrix Composites by turning, i- managers journal on Mechanical Engineering , Vol.2 .No.2 (Feb-April 2012), pp 31-39.
• N.Muthukrishnan, An experimental investigation and optimization of turning fabricated Al/SiC/B4C Hybrid Metal Matrix Composites using desirability analysis – managers journal on Mechanical Engineering , Vol.2 .No.4 (Aug-Octol 2012), pp 10-17.
• N.Muthukrishnan,VarunKrishnakumar,Kailash, Prahlada Rao, M.Murugan, High speed machining of Al/SiC (20p) MMC using PCD inserts, journal of Manufacturing Technology Today , Vol.6, Issue.10, 2007.
• N.Muthukrishnan, C.Avinash,S.Raghuraman,S.Ramaswamy, Analysis on Tool wear of PCD 1500 medium Grade Insert on Machining Al-SiC Metal Matrix Composites, Journal of Manufacturing Engineering, Vol.2, Issue 4, 2007, Pp  233.
• N.Muthukrishnan, Machinability studies and ANN modeling of turning Al-SiC (10p) Metal Matrix Composites accepted for publication in Indian journal on future engineering and Technology.
• N.Muthukrishnan, Comparison of two grades of PCD inserts on Machining CFRP Composites Indian journal on future engineering and Technology. Vol.6, No-1, Pp 70-74.
• R.Ramanujam, R.Raju, N.Muthukrishnan, Optimization of multiple performance characteristics in turning Al-SiCp Metal Matrix Composites using weighted principal component analysis Journal of Manufacturing Technology Today, Vol.9 .No -11-12, Pp 3-10.
• N.Muthu Krishnan,R.Ramanujam, Performance Evaluation of PCD 1500 Grade Insert on Turning A356 Alloy with 10% Reinforcement of SiC Particles The IUP Journal of Mechanical Engineering, Vol. IV, No. 2, 2011, Pp -7-19.
• N.Muthu Krishnan, Kaarmuhilan, Karthika, Study on Performance behaviour of PCD Grades on machining A356 alloy containing 10% reinforcement of SiC particles Indian journal on future engineering and Technology. Vol. 7 No. 1 2011 August  October.
• N.Muthukrishnan, Experimental Investigation of optimum parameters for turning of Al6061  10% ZrB2 Metal Matrix composites using desirability analysis, i-managers journal on future Engineering and Technology, Vol.7. No.3. (Feb-April 2012.pp 17-25.
• N.Muthukrishnan, Machinability studies on fabricated Al  SiC-B4C Hybrid Metal Matrix Composites by turning, i- managers journal on Mechanical Engineering , Vol.2 .No.2 (Feb-April 2012, pp 31-39.
• ASME Papers
• “An investigation on effect of work piece reinforcement percentage on tool wear in cutting Al-SiC Metal matrix composites”, proceeding of ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007 at Seattle, washington,USA
• “Effect of Austenitic Fillers on Mechanical Properties of AISI 410 Martensitic Stainless Steel Weldments” 7th ASM International conference on new trends in welding Technology,on may 15-19,at Georgia, USA.
• “An investigation on machining behaviour of Metal Matrix composites by using PCD inserts” ASME World Tribology Congress held on sep 12-15, 2005 ,at Washington,USA.
• Machinability studies and artificial neural network modeling of turning Al-SiC (10p) Metal Matrix Composites ASME International Mechanical Engineering Congress and Exposition, October 31-06 Nov, 2008 at Boston, USA
• Modeling machinability parameters of turning Al-SiC (10p) MMC by ANN” ASME International conference on manufacturing science and Engineering” Octo 7-10,2008,Evanston, USA.
• Other International Conference papers
• “Some performance aspects of Machining Al-Si-LM-13 by using Hardened C-15 cutting tool”, International Conference on High speed Machining at Nanjing, China, Mar 31 Apr 04, 2004.
• “An experimental Investigation on high speed machining of medium carbon steel with PCD tool”, International Conference on High speed Machining at Nanjing, China, on 31/3/03  2/04/04″. Organised by University of Aeronautics and Astronautics
• “Influence of cemented Carbide tip tool on machining Ti6Al4V alloy under different cutting parameters” Third International Conference on Material processing for properties and performance on 24/11/04  26/11/04 at Singapore,Organised by Nan yang University.
• “An investigation of machining OHNS material by high speed machining using ceramic tool” International conference on EISCO 2005 at Kumaraguru college of Engg. Coimbatore
• “Analysis on machining characteristics of spherodized EN 2A material by plain turning” Third International Conference on Material processing for properties and performance on 24/11/0426/11/04 at Singapore,Organised by Nan yang University.
• “Performance Evaluation of coated K20 Carbide tools on Machining OHNS material under different cutting parameters” Eight International Conference in Manufacturing and Management,organized by Pacific Congress on Manufacturing and Management,Gold coast,Australia on 8/12/04  10/12/04
• “Studies on the machining behaviour of Metal matrix composites by using K20 Carbide cutting tool” Eight International Conference in Manufacturing and Management,organized by Pacific Congress on Manufacturing and Management,Gold coast,Australia on 8/12/04  10/12/04.
• “Correlating the machinability analysis of metal matrix composites by using Neural networks” International conference on Recent advances in manufacturing process(RAMP 05) at National Engineering college,Kovilpatti,Tamilnadu.India on 23/02/05 – 25/02/05.
• “Machinability Analysis on MMC(Al-SiC) by Using Artficial Neural Network”, 3rd International Conference on Leading Edge manufacturing in 21 century, held in Nagoya,Japan, 19/10/05 -22/10/05, organised by Japan society of Mechanical Engineers
• “High speed machining of Al/SiC/MMC by using PCD 1300 insert” International conference on material processing for properties and performanceOn 30/11/05 to 2/12/05 organised by National Institute of Advanced industrial science and supported by Nanyang TechnologicalUniversity,Tsukuba,ScienceCity, Ibaraki, Japan
• “High speed machining of Al/SiC/MMC by using PCD 1300 insert” International conference on material processing for properties and performanceOn 30/11/05 to 2/12/05 organised by National Institute of Advanced industrial science and supported by Nanyang TechnologicalUniversityTsukubaScienceCity,Ibaraki, Japan.
• “Influence of Tool geometry of High speed steel on Machining Pure Commercial Aluminium Alloy” Tehran International Congress on Manufacturing Engineering (TICME 2005), December 12-15 , 2005, Tehran. Iran.
• “Machinability of MMC Composites- Artificial Neural Network and Anova AnalysisPublished in the Tehran International Congrss on Manufacturing Engineering (TICME 2005), December 12-15 , 2005, Tehran. Iran
• “Study of tool wear by machining fabricated Al-SiC (10p) by using CNMA 120408 under different machining conditions Published in International Conference on AMPC (2006), on 28-30 August 2006, Anna university, Chennai.
• “Machinability analysis of Aluminium graphite MMC by using a thin film of hard coating of tantalum nitride on carbide insert cutting tool”, International Conference on AMPC (2006), on 28-30 August 2006, Anna university, Chennai.
• “An analysis on tool wear of PCD 1500 medium grade insert on machining Al-SiC MMC”, fifth international conference on material processing for properties and performanceOn 11/12/06 to 15/12/06 organised by National Institute of Advanced industrial science and supported by Nanyang Technological University, Grand copthorne water front Hotel, Singapore.
• “Predicting the machinability parmeters of fabricated Al-Sic (10p) Metal matrix composites by using Artificial Neural Netwotrks”. fifth international conference on material processing for properties and performanceOn 11/12/06 to 15/12/06 organised by National Institute of Advanced industrial science and supported by Nanyang Technological University, Grand copthorne water front Hotel, Singapore
• “Performance Evaluation of Tantalum Nitride thin film hard coated K20 insert on machining Inconel 600″‘ International Technology and Innovation conference 2006, Held at China , on November.
• “INVESTIGATION ON TOOL LIFE OF PCD 1300 GRADE INSERT ON MACHINING Ti 6Al 4V-, 6 th International conference on Material processing for properties and performance (MP3), Held at Beijing International convention center, China, on Sep 13-16,2007
• “comparison of tool wears of k20 carbide and pcd insert on machining al/sic (10p) under different machining conditions”, 6 th International conference on Material processing for properties and performance (MP3), Held at Beijing International convention center, China, on Sep 13-16,2007.
• “Machining behaviour of poly crystalline diamond insert on turning GFRP Composites”, ICAMB 2009, Dec 14-16, at Vellore Institute of Technology.
• “Machinability studies of turning Magnesim alloy by Poly crystalline Diamond Insert” , ICAMB 2009, Dec 14-16, at Vellore Institute of Technology.
• “Performance Evaluation of K 20 carbide and PCD insert on machining GFRP composites” American Manufacture Association (ACMA), Composites 2010, Las Vegas, USA, Feb 9-11,2010.
• A.Nelson Nishanth*, Karthik Narasimhan,T.R.Adhithya Sethupathy.N.Muthu Krishnan, Performance evaluation of Manganese Phosphate Coated HSS (High Speed Steel) on turning M1A Magnesium Alloy , 2011 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011)PP -403-407.
• RE K.Kaarmuhilan, S.Karthika, N.Muthu Krishnan, Performance Evaluation of PCD 1300 and 1500 Grade Inserts on Turning A356 Alloy with 20% Reinforcement of SiC Particle , 2011 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011)PP -563-567.
• National Conference Papers
• “Machinability of AISI 4340 with poly crystalline cubic boron nitride cutting tool: An experimental approach”, Presented in National conference on Emerging trends in Science, Engineering and Management, at Adhiyamaan Engineering College, ISTE Students chapter, Sep 8  9,2003
• “Study on performance Evaluation of peripheral Milling on low carbon steel  C-15” National conference on Advances in manufacturing(NAME -2004) at Jawaharlal nehru national college of Engineering, Shimago on 12/02/04 -14/02/04.
• “Surface finish enhancement on OHNS material by using Cylindrical Grinding machine” National technical symposium ACUMEN-04 at Vasavi College of Engineering, Hyderabad on 29/1/04  30/1/04,Organised by ISTE student chapter and won I st prize
• “Prediction of quality surface finish of Medium Carbon steel by Machining under different cutting parameters.” National Conference on Modeling and Analysis of Production Systems (MAPS 04) Organised by NIT,Trichy on 22,23 Jan 2004.
• “An investigation on machining EN 31 material by high speed machining using PCBN cutting tool” Conference on Advances in Materials and manufacturing Techniques (AMMT – 2004) on 8-9 March 2004 at JNTU College of Engg, Hyderabad
• “Study on Analyzing the fabrication process of Metal Matrix Composites” National Conference on Fabrication Process of Composites and Light metals (FPCL -04) on 2-3, Jan 2004, organised by Annamalai university.
• “Prediction of quality surface finish of OHNS material by using TTI 15 cutting tool underdifferentcutting parameters”, 92 nd Indian science congress, (3-8, Jan-2005) Ahmedabad
• “High speed machining of Aluminium alloy”, National conference on Competitive manufacturing technology and management for global marketing,(CMTM – 7,8,Jan- 2005), at Crescent Engg.College,Chennai  600048
• “Performance evaluation of CBN Tools on Machining Inconel 600”, National conference on Competitive manufacturing technology and management for global marketing,(CMTM -7,8,Jan- 2005),at Crescent Engg.College,Chennai  600048.
• “Influence of PCD insert 1600 grade on machining metal matrix composites Al-SiC under different cutting parameters”. National conference on Contemporary Approaches in Design and Manufacturing (CADAM’05) at Alagappa Chettiar College of Engg. And Technolopgy on 23/03/05 -24/03/05
• “Performance Evaluation of K20 Carbide tools on Machining Silicon carbide Reinforced Aluminium Metal Matrix Composite”, National conference on Contemporary Approaches in Design and Manufacturing (CADAM ’05) at Alagappa Chettiar College of Engg. And Technolopgy on 23/03/05 -24/03/05.
• “Machinability Analysis of Al-SiC Metal Matrix Composite by using PCD insert 1600 Grade” National conference in Advances in Manufacturing,(AIM- 05) on 12,13 May 05 at Vasavi College of Engineering, Hyderabad
• “Performance Evaluation of K 20 carbide Tip tool on machining Titanium Alloys under different cutting parameters”, 94 th Indian science congress held at Anna malai University, Chidhabaram during 3-7, Jan 2007.
• “An Experimental investigation on machining A356 Aluminium alloy with K20 uncoated carbide insert”, 94 th Indian science congress held at Anna malai University, Chidhabaram during 3-7, Jan 2007.
• “Machinability studies of Ti-6Al-4Vi by different cutting inserts” Presented in the symposium organized by Birla Institute of science and Technology (BITS) as APOOGEE -08, on 11-03-2008-15-03-2008.
• “Experimental investigation on Turning MIA magnesium alloy using PCD insert”, Indian Science Congress, at Thiruvananthapuram, Jan, 3-7, 2010.
• “Machinability studies of turning CFRP composites by using PCD inserts”, Indian Science Congress, at Thiruvananthapuram, Jan, 3-7, 2010.

Attended the “National Conference on Manufacturing Systems Design and Business Re-Engineering” organized by Department of Production Engineering, MIT, Anna University.20-02-1998 & 21-02-1998.
Presented a paper in “National Conference on Modeling, Analysis of Production System” organized by National Institute of Technology, Trichy. 23-01-2004 & 24-01-2004.
Attended the workshop on “Quality Engineering and Management” organized by Rajalekshmi Engineering College, Thandalam , Chennai on 31-01-2003.
Attended Two day workshop on “Trends on CNC Machining” organized by JNTU College of Engineering,Andhara Pradesh on 19-08-2005 &20-08-2005.
Presented a paper in “National Conference on Emerging Trends in Engineering, Technology and Management” organized by Athiyaman Engineering College, Hosur on 8-09-2003 & 9-09-2003.
Organized a two-day workshop on �Under the roof of the cylinder Head� on 23 & 24 Sep 2010, at SVCE
Membership of Professional Bodies
Member in Indian Society of Technical Education — LMISTE
Member in Indian Science Congress Association — ISCA
Member in American Society of Mechanical Engineers – ASME
Course Material Prepared
Lab manual for special purpose machine shop
Engineering Drawing Lecture Notes
Other contributions
Acting as Reviewer for International Journals (Elsevier , Springer, Inderscience)
Motivating the students to present/publish papers in various conferences and journals (some papers received prizes)
Guiding students to do research experiments
Involving in Design of curriculum and syllabus preparation of B.E (Mechanical Engineering), B.E. (Automobile Engineering) and B.E. (Marine Engineering)
Involving in the preparation of documents for NBA-accreditation committee visits
Involving in the preparation of ISO documents
Acting as a member in the monitoring the students activities in the campus
Acting as a department coordinator for conducting lab exams for AMIE students
Awards and Recognitions
1. Listed in the �Marquis who is “who” in the world 2010 edition.
2. Listed in the Marquis Who’s who in the World for the year 2011.

3. Listed in the Marquis Who’s who in the World for the year 2012.

4. Listed in the Marquis Who’s who in the World for the year 2013

5. Listed in the Marquis Who’s who in the World for the year 2014

6. Listed by the International Biographical Centre, Cambridge, England as one of the Top 100 Scientists 2010.

7. Listed in the Marquis Who’s who in Science and Engineering 2011.

8. Listed by the International Biographical Centre, Cambridge, England as one of the Top 100 educators 2011

9. Recognized as a research supervisor in Sathyabama University, Chennai.

10. Recognized as a research supervisor in St.Peters University

11. Recognized as a research supervisor in Anna university, Chennai

Guiding 6 research scholars for PhD
Member in Welding research and FRP cell
Academic monitoring committee member