Profile
Name Ms. S. Sinthamani
Designation Assistant Professor
Areas of Interest Fabrication of nano electronic devices
Room No. 3003
Intercom No. 251
Mobile 9962088640
Email Id (Official) sinthamani@svce.ac.in
Email Id (Personal) -
Qualification
  • M.E(Power Electronics and Drives) in 2009 at Eashwari Engineering College
  • AMIE (Electrical Engineering) in 2006 at The Institution of Engineers(India), kolkata.
Academic Experience
  • Working as Assistant Professor in Sri Venkateswara College of Engineering, Chennai from June,2012 to till date.
  • As Assistant Professor at Meenakshi College of Engineering, West KK Nagar, Chennai (3yrs)-2009-2012
  • As electrical Supervisor at Tony Trans, SIPCOT, Vadalur (2 yrs)
Courses Handled
    UG

  • Tamil language and Heritage of Ancient Tamil Society.
  • Science and Technology in Ancient Tamil Society.
  • Electric Power System
  • Electrical Generation and Utilization
  • Power Electronics
  • Electrical Engineering
  • Digital Logic circuits
  • Special electrical Machines
  • High voltage Engineering
  • Electrical MachinesI
  • Eletrical Drives and Control
  • Basic Electrical and Electronics Engineering
  • Marine Electrical Machines I

    • PG:

  • Special electrical Machines

    • Labs:

  • Linear & Digital Integrated Circuits Lab
  • Power Electronics Lab
  • Circuit Theory lab
  • Engineering Practices Lab
  • Eletrical Machines I Lab
  • Basic Electrical and Electronics Engineering Lab
  • Electrical and Electronics and Control System Lab
  • Electronics Devices and Circuits Lab
  • Electrical Electronics and Micro Processor Laboratory
Research & Consultancy
    Published Paper

  • S. Sinthamani, “Control of Multiphase boost type Switched mode Rectifier”, published in International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Vol 3, ISSN: 2278-8875, Feb 2014
  • S. Sinthamani, M.RanjithKumar, Sudhakar K Bharatan, S.Anitha, Sudharsanam S, Sasikala M,”Optical Characterization of RF sputtered copper oxide for thin film solar cell application”,Materials today: Proceedings, Elsevier, 59, Part 1, 1814-818, 2022.
    Consultancy work carried out:

  • Submitted Research proposal to execute Research projects under scheme of Indian Nano Electronic User Program (INUP), Conducted by the Center for Nano Science and Engineering (CeNSE), Indian Institute of Science, Bangalore, in the month of September 2019.
  • Based on the Experts recommendations in INUP, the project has been approved and completed three phases of execution of research project during the month of January 2020 and March 2020.
  • Submitted Research proposal to execute Research projects under scheme of Indian Nano Electronic User Program (INUP), Conducted by the), Indian Institute of Madras, Chennai in the month of March 2022 and got selected.
    Proposals Submitted

  • Research Proposal submitted as CO PIUnder Chief Minister’s Research Grant Scheme with title “Fabrication of Ga2O3 FET for EV Power train andImplementation of Wide Bandgap Ga2O3 based DC-DC converter for FastCharging Applications” for the total cost of 40 lakhs.
  • Proposal submitted for Intramural project funding for the Academic year 2022-2023 titled as “Simulation and Fabrication of Multi junction Solar cell for automobile applications” for the cost of Rs 48 000.
  • Submitted a proposal to SVCE PG intramural project funding for the academic year 2017-2018 titled “DC-DC Converter for wearable Devices ” and granted with an amount of Rs.10000.
  • Submitted a proposal to Tamilnadu State Council For Science And Technology titled “DC-DC Converter for wearable Devices “.
  • Submitted Project proposal to The Institution of Engineers (India) R&;D Grant-in-aid Scheme for UG Final Year Project titled as ” Design and Micro fabrication of CuO/ZnO Thin Film Solar Cells by RF Sputtering”, 2019.
  • Submitted UG final year project for INNOVATION STUDENT PROJECT AWARD competition 2019 titled as “Fabrication of thin film Solar cell with different contacts”.
  • Submitted Proposal under Science and Technology Project Scheme for Research Scholar Titled as “Fabrication of RF Sputtered thin film Solar cell” in Association with Dr. Sudhakar K.Bharatan for the Amount of Rs.5,oo,ooo during March 2019.
Conference / Workshop / FDP
  • Presented a paper “Simulation of metal Oxide based thin film solar using SCAPS 1D” in 13thInternational Conference On Science And Innovative Engineering And Samarkand State University, Uzbekistan conducted by Jawahar Engineering College, Chennai May 14 th , 2023.
  • Presented paper in IEI Tamil Nadu Centenary Technical Conference- ICET 2019, Titled as “Fabrication of Metal Oxide Thin Film solar cell” on August 20 and 21, Conducted by The Institution of Engineers (India), Tamilnadu State Center Chennai 600 005.
  • S. Sinthamani, “PWM Boost Converter with active snubbers”, presented at “National Conference on Soft Skill Applications for Solid State Drives”, Rajalakshmi Engineering College, Thandalam,Chennai -602105. 17 & 18 April 2009.
  • S. Sinthamani, “Converter Fed PMBLDCM Drive with Reduced Switches for adjustable Speed applications”, presented at “National conference on recent trends in electrical science and technology”, Feb 2013
  • S. Sinthamani, “An integrated dc/dc converter for renewable voltage sources”, presented at “National conference on recent trends in electrical science and technology”, Feb 2013
  • Sinthamani, S & Sathish, N 2015, “The design of adaptive controller for regenerative braking system in electric vehicle”, proceeding of the 3rd National conference on Frontiers in Applied Sciences and Computer Technology, National Institute of Technology, Trichirapalli, pp.284-288.
  • “Solar Powered DC-DC Converter for wearable Devices” in 4th International Conference on Electrical Energy Systems (ICEES -2018) Organised by SSN College of Engineering, Kalavakkam- 603110.
  • “RF Sputtered COPPER Oxide and Zinc Oxide Thin films for solar cell” in National Conference on Advanced Electrical and Electronics Engineering, (NCAEEE 2018) Organised by SVCE, Pennalur, 602 117.
  • Attended and presented a paper entitled “Investigation of Annealing Effects On RF Sputtered CuO And ZnO Thin Films For PV Application in National Conference on “Advances in Electrical and Electronics Engineering (NCAEEE -2022) Organised by SVCE, Pennalur on 27th – 28th May, 2022.
  • Attended and presented a paper entitled “Optical characterization of RF sputtered copper oxide for thin film solar cell in the Third International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2021) held at the Department of Mechanical Engineering,D Y Patil College of Engineering and Technology, Kolhapur, Maharastra.
  • Attended and presented a paper entitled “Modeling of ZnO/MoS2 Schottky Junction Diode Using COMSOL Multiphysics” in the AICTE sponsored International E- Conference on “Smart Technologies in Electric Vehicles and Power Grid (STEP-2021)” Organised by SVCE, Pennalur on 27th – 29th January, 2021.
  • Presented a paper in AICTE Sponsored International conference on Smart Materials and Emerging echnologies for Industries 4.0 (SM ETI 2020) titled as “Deposition and Optimization of Cuo as Absorption Layer Using Rf Sputtering For Pv Application” On 16 &17 October, 2020.
  • Attended “10 days Advanced Training Program on Nanofabrication and Characterization Techniques “from 16-July to 26-Jul-2019, at CeNSE, IISc, Bangalore (Through INUP).
  • Attended One day workshop on “Latest trends and Technologies on Test Hand Measuring Industry” held on 9th August, 2019, organized by ECE Dept , SVCE ,conducted by Aarjay International Private Limited & Tektronics India Private Limited.
  • Attended Short term course on crystalline Material and characterization on 5 th January 2019 organised by Crstal Growth Center, Anna University, Chennai.
  • Attended 10 DAYS short term course (VICT) Vertical integration course for trainers conducted by Marie time foundation,Nungabakkam, Chennai (from 15.04.2019 to 26.04.19). Approved by the Directorate General of Shipping , Ministry of Shipping, Government of India,.
  • Participated in “International Workshop on Advanced Materials and Device Technology”, Organized by Crystal Growth Centre, Anna University,Chennai 25 during 22.11.17 to 24.11.2017
  • FDTP on EC6703 EMBEDDED AND REALTIME SYSTEMS from 13th to 21st June 2017 , conducted by ECE department , SVCE.
  • FDP on Special Electrical Machines hosted by Valliammai Engineering College, kattankulathur, Chennai during 2010.
  • Two weeks ISTE workshop on ANALOG ELECTRONICS conducted by IIT Kharagpur,at saveetha engineering college,4th June to 14th June,2013.
  • Attended 3 days conference 28th Indian Engineering Congress conducted by IEI (INDIA),at Chennai,December 20-22,2013.
  • One day worhshop on UPS Maintenance and Servicing held on 28.6.2013 at SVCE.
  • Faculty improvement programme conducted by CITM, CSE dept., SVCE held on 27th and 28th December,2013.
  • Attended 3 Days workshop (Summer Internship Program June 15-17) 2016,Conducted by Dept od Nano Science& technology, Sri Ramakrishna Engineering College,Coimbatore
  • One day workshop on ” Opportunities & Challenges in Energy Storage systems for Buildings ,Solar, Wind sectors”conducted by Dept of Energy Studies, CEG, Guidy, Chennai, on March 4th ,2017.
  • Participated and presented the research poster in the National Symposium on Nano Science & Technology(NSNST 2018) Conducted at the center for Nano Science and Engineering (CeNSE), Indian Institute of Science,Bangalore.

    • FDP Attended:

  • Attended a webinar on “Essential Skills for Crafting Quality Research” held from May 23 to 25, 2024. The event was conducted by the Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering.
  • Participated and received the certificate for Five Days Online STTP on “Process Modeling, Simulation and Control “conducted by Department of Chemical Engineering, Sri Venkateswara College of Engineering from 23.05.2024 to 29.05.2024
  • Participated in a Faculty Development Program on “Emerging Technology in Artificial Intelligence” from 19/02/2024 to 24/02/2024conducted by Department of Information Technology, Jeppiaar Institute Technology.
  • Completed Energy Literature Training and received certificate from Energy Swaraj Foundation.
  • Participated in One Week International Faculty Development programme on “Research Innovations and Emerging Advances in Electrical Engineering” organized by the Department of Electrical & Electronics Engineering, Easwari Engineering College from 05th to 12th Jan 2023.
  • Participated in one week FDP Organized by SVCE, for the new tamil course HS 22151- Tamil Language and Tamil Heritage new course introduced in R22 (Common subject), from 7-11 of November ,2022.
  • Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online Elementary FDP on “Recent Advances In Nanoscience And Nanotechnology” from 17/01/2022 to 21/01/2022 at Rajasthan Technical University.
  • Participated in Faculty Development Program on” Emerging Research Trends on Battery and Electric vehicle Technology” Organized by Dept of EEE, SSN College of Engineering, held on 25 & 26, February 2021.
  • Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online Elementary FDP on “Nanodevices and Advanced Nanomaterials” from 06/12/2021 to 10/12/2021 at Sikkim Manipal Institute of Technology.
  • Attended FDP on Nano Science and Technology (Energy Environment Helathcare) from 29.06.2020 to 07.07.2020 Conducted by Satyabama Institute Science and Technology in Association with IIITDM Kanchipuram.
  • Participated in National Level Faculty Development Programe on “Control Systems” organized by the SRM Institute of Science and Technology Ramapuram, Department of Electrical and Electronics Engineering from 21st July to 25th July 2020.
  • Attended 5 days FDP on R programming (from 04.05.20 to 08.05.2020) conducted by Sathyabama Institute of Science and Technology in Association with IIT Bombay.

    • Workshop Attended:

  • Attended the “Disaster Awareness and Management Training Program” given by Sri Sathya Sai Seva Organisation (SSSO), Disaster Management Team (Authorized by Government of Tamil Nadu) on 1st June ,2024, SVCE.
  • Attended one day workshop on “Design of hydraulics circuits in Automation Studio” on 03.05.2023 organized by automation studio.
  • Attended one day workshop on “Faculty sensitisation program” organized by the standard club in association with Bureau of standards,SVCE on 10th January, 2024.
  • Attended a workshop on “Curriculum Design” conducted by SVCE, on 18th October, 2022.
  • Attended a Webinar on ‘Design and Simulation of Hydraulic Circuits in Automation Studio” on May 3, 2023.
  • Attended a webinar on “Technology day talk” ,organized by IEI (India) , Kalpakkam local centre held on 25 th may , 2023.
  • Participated 3 days INUP- i2i Familiarization Workshop on Nano Fabrication Technologies held at IIT Madras during 11-13 January, 2022.
  • Participated in the Workshop on “Thin film deposition and device fabrication” Conducted by Vellore Institute of Technology ,during 7th – 9th January 2022.
  • Attended a National Level Technical Workshop on ” Solar Cell Fabrication and Characterization ” organized by the Department of Electrical and Electronics Engineering, SSN College of Engineering, Chennai in Association with the Institution of Engineers (India) on July 19, 2021.
  • Participated and Completed a Online Certification Program on ADVANCED EXCEL organized by the Department of Information Technology, Sri Venkateswara College of Engineering from 7th July to 12th July, 2021.
  • Participated in the short-term course on” Optoelectronics and Nano photonics” conducted by Department of Electronics and Electrical Engineering under the Quality Improvement Programme (QIP) sponsored by AICTE / Ministry of Human Resource Development, Government of India, during November 06-07 & 09-12, 2020.
  • Participated in “Awareness Webinar on Outcome Based Education and Accreditation (OBE&A)” on 25-11-2020, organized by National Board of Accreditation, New Delhi in association with Jawaharlal Nehru Technological University, Hyderabad.
  • Participated in AICTE Sponsored – Six-Days Online Short Term Training Programme on”Power Utilities and Artificial Intelligence – Leveraging the Data” during 07th – 12th December, 2020 organized by the Department of Electrical & Electronics Engineering, CMR Institute of Technology, Bengaluru.

    • Internship Organized

  • Organized 2 week Summer Internship 2024 on “Seminconductor Technology “conducted by DST FIST sponsored Interdisciplinary Nano Research Centre (iNRC) at Sri Venkateswara College ofEngineering, Pennalur. Phase I (from 18.06.2024 to 28.06.2024) and PhasI I (from 02.07.2024 to 12.07.2024 ).
    NPTEL ON LINE COURSES COMPLETED

  • Completed NPTEL course Titled as Soft Nano Technology July to September 2016.
  • Completed NPTEL course Titled as Materials Characterization Jan to April 2017.
  • Completed course on R Programming an online non-credit course authorized by Johns Hopkins Bloomberg School of Public Health, through coursera, during May 2020.
  • Completed course in Nanotechnology: A Maker’s Course an online non-credit course authorized by Duke University, North Carolina State University and The University of North Carolina through Coursera, during June 2020 .
Laboratory Handled
Training Attended
Additional Responsibilities
  • Data collection and compilation of Department Newsletter.
  • Faculty Advisor for 2023-27 B batch (52-68)
  • Over all Co-ordinator for TAU and Student Attendance under the regulation 2022 UG&PG
  • Course Co-ordinator for the common course EE22151/Basic Electrical and Electronics Engineering
  • Faculty Advisor for batch A1 of student admitted in the 2019-2023 under CBCS Scheme.
  • Over all co-ordinator for TAU and Student Attendance under the regulation 2016 and 2018.
  • Assist to UG Project Coordinator for year 2019-20.
Achievements

Proposal Submitted:

  • “Proposal submitted for Intramural UG project funding for the Academic year 2023-2024 titled as “Simulation and Fabrication of Hetero Junction thin film Solar cell.”
    • expand_less
    motorchip aiflasksideasketch website toygearbiotechnologydata-complexitypromotioncomputersoftwareweb-design idea-1 creativitymicroscopechemistrymodelassemblyplay-outlined-circular-buttonpausecreative open-bookteamwork-team gaugegoallaboratory mathematicsatommechanicmicroscope-1 factory sketch-1 charitysystempistonscruise envelopefacebook-placeholder-for-locate-places-on-mapssmartphone-callold-typical-phoneuserantennacoding computers-network-interface-symbolsearchgoodwillplay-buttonpause-1 tickleft-arrow