Profile
Name Dr. J. VENKATESAN
Designation Professor and Head, Dean (Students' Welfare)
Areas of Interest Heat Transfer, Internal Combustion Engines, Thermodynamic Modelling, Refrigeration and Air Conditioning
Room No. 9004
Intercom No. 450
Mobile 9444339292
Email Id (Official) jvenkat@svce.ac.in
Email Id (Personal) jvenkat1965@gmail.com
Qualification

Ph.D. – Mechanical Engineering, Anna University, Chennai

M.E. – Thermal Power Equipment, Regional Engineering College (NIT Trichy), Bharathidasan University

B.E. – Mechanical Engineering, Annamalai University

Academic Experience

 

  • Head of the Department & Professor from 18-05-2015 to till date, Department of Automobile Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Professor from 01-07-2012 to 17-05-2015, Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Associate Professor from 01-06-2010 to 30-06-2012, Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Assistant Professor from 01-06-2005 to 31-05-2010, Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Senior Lecturer from 01-10-2000 to 31-05-2005, Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Lecturer from 12-10-1998 to 30-09-2000, Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Pennalur.
  • Lecturer from 26-06-1996 to 11-10-1998, Department of Mechanical Engineering, Shanmugha College of Engineering, Thanjavur.

 

Courses Handled

Theory Subject Handling
Thermal Engineering and Heat Transfer

Automotive Air-Conditioning

Automotive Engines

Transport Management

Engineering Thermodynamics

Thermal Engineering

Engineering Graphics

Heat and Mass Transfer

Turbomachines

Engineering Mechanics

Basic Mechanical Engineering

Mechanical Engineering

Applied Thermodynamics & Heat Transfer

Design and Analysis of Turmbomachines

Simulation of I.C. Engine Processes

Advanced Heat Transfer

Design of Heat Exchangers

Refrigeration System Design

Design of Condensers, Evaporators and Cooling Towers Laboratory Handled
Thermal Engineering Lab-I

Thermal Engineering Lab-II

Fluid Mechanics and Machinery Lab-I

Basic Workshop

I.C. Engines Lab

Research & Consultancy

 

  • International Journal – 20
  • National Journal – 3
  • International Conference – 8
  • National Conference – 8

    International Journal

  • Dr. J. Venkatesan and B. Vijaya Ramnath (2016), “A Grey-Fuzzy Modeling for Evaluating Surface Roughness and material Removal Rate of Coated End Milling Insert”, Measurement (Elsevier) [ISSN: 0263-2241], Vol. 84, pp. 68-82.
  • Dr. Venkatesan. J (Dec 2016) , “Investigation on Effect of Machining Parameters of End Milling on Surface Finish and Temperature Using Taguchi Technique”, Journal of Manufacturing Science and Production [ISSN: 2191-0375], 16(4), pp. 255-261.
  • Dr. Venkatesan. J and G. Mohammed Basha (July 2016), “Study of Corrosion Behaviour of Tungsten Carbide, Aluminium Chromo Nitride Coated and Diamond like Carbon Coated End Milling Insert”, International Journal of Chem Tech Research [ISSN: 0974-4290], Vol. 9, No. 7, pp. 242-247.
  • Dr. J. Venkatesan (Oct 2017),”A Review on Solar Updraft Towers”, International Journal of Scientific Research Organization [ISSN: 2456-6942], Vol. 1, Issue 7, pp. 10-13.
  • Dr. J. Venkatesan “Influence of Cooling Rate on Fatigue Behaviour of Eutectic Al-Si (A413) Alloy Casting” Applied mechanics and materials [ISSN: 1660-9336], Vol.787, pp. 490-494.
  • Dr. J. Venkatesan “Performance of Latent Heat Solar Thermal Energy Storage System” International Journal of Applied Engineering Research [ISSN: 0973-4562], Vol.10, Issue 63, pp. 192-195.
  • Dr. J. Venkatesan “Effect of Charge Cooling on Engine Performance and Emission” International Journal of Applied Engineering Research [ISSN: 0973-4562], Vol.10, Issue 63, pp. 216-221.
  • Dr. J. Venkatesan “Theoretical Investigation on Combustion with Preformed Vortex Patterns” Applied mechanics and materials [ISSN: 1660-9336], Vol.812, pp. 44-50.
  • Dr. J. Venkatesan “Wear behaviour of Al-Si Alloy Casting subject to different cooling rates” Journal of the Balkan Tribological Association, Vol.20, No. 3, pp 479-487.
  • Dr. J. Venkatesan “Effect of Cooling Rate on Spatial Variation in Structural Morphology of Hypo-Eutectic (A380) Al-Si Alloy Casting”, International Journal of Mechanical and Mechatronics Engineering [ISSN: xxxx-xxxx], Vol.16, Issue 06, pp. 83-88.
  • Dr. J. Venkatesan “Feasibility Analysis of Fish Oil Bio Diesel Blend as a Stationery and Automotive Diesel Engine Fuel”, PENSEE Multidisciplinary Journal, [ISSN: 0031-4773], Vol.76, Issue 4, pp. 291-300.
  • Dr. J. Venkatesan “Experimental Investigation of Single Cylinder Four Stroke SI Bajaj Engine Using Denatured Sprit85 as Alternative fuel”, Journal of Mechanical Engineering, [ISSN: 0039-2472], Vol.62, Issue 1, pp. 1-12.
  • Dr. J. Venkatesan “Experimental Investigation on Varying Engine Torque of SI Engine Working Under Gasoline Blended with Oxygenated Organic Compounds”, International Journal of Advanced Engineering Technology, [ISSN: 0976-3945], Vol.1, Issue 3, pp. 65-73.
  • Dr. J. Venkatesan “Emission and Combustion Characteristics of SI engine Working Under Gasoline Blended with Ehtanol Oxygenated Organic Compounds”, American Journal of Environmental Sciences, [ISSN: 1553-345X], Vol. 6, Issue 6, pp. 495-499.
  • Dr. J. Venkatesan “Influence of Isobutanol Blend in Spark Ignition Engine Performance and Emissions Operated with Gasoline and Ethanol”, International Journal of Engineering Science and Technology, [ISSN: 0975-5462], Vol. 2, Issue 7, pp. 2859-2868.
  • Dr. J. Venkatesan “Experimental Validation of a Mathematical Model of a Reed-Valve Air Compressor from an Automotive-Braking System”, International Journal of Automotive Technology (Springer) [ISSN: 1229-9138], Vol.11 No. 3, pp. 317-322.
  • Dr. J. Venkatesan “Modification of Two Stroke I.C.Engine to Reduce Emission and Fuel Consumption”, International Journal of Engineering and Technology [ISSN: 1793-8236], Vol.2, No. 1, pp. 42-47.
  • Dr. J. Venkatesan “Mathematical Modeling and Simulation of a Reed Valve Reciprocating Air Compressor”, Thermal Science International Scientific Journal [ISSN: 0354-9836], Vol.13 No. 3, pp. 47-58.
  • Dr. J. Venkatesan “Mathematical Modeling of Water Cooled Automotive Air Compressor”, International Journal of Engineering and Technology [ISSN: 1793-8236], Vol.1 No. 1, pp. 50-56.
  • Dr. J. Venkatesan “Mathematical Model for Theoretical Investigation of a Disc Valve Reciprocating Air Compressor of Automotive Braking System”, International Journal of Applied Mathematical Analysis and Applications [ISSN: 0973-3868], Volume 2, No. 1-2, pp. 209-227.

    National Journal

  • Dr. J. Venkatesan “Experimental Investigation on Low Heat Rejection Engine (LHRE) Fuelled with Cedarwood Biodiesel-Diesel Blend”, Journal of Chemical and Pharmaceutical Sciences [ISSN: 0974-2115], Issue 4, pp. 128-130.
  • Dr. J. Venkatesan “Mathematical Modeling and Simulation of Reciprocating Compressors � A Review of Literature”, Journal of Mathematics Modeling and Applied Computing, [ISSN: 0973-6093], Vol. 11, No.1, pp. 81-96.
  • Dr. J. Venkatesan “Experimental Investigation on Varying Engine Torque of SI Engine Working Under Gasoline Blended With Ethanol and Methoxy Ethanol Blends”, Inventi Journals-Auto, Vol. 1, Issue 1.

    International Conference

  • Dr. J. Venkatesan “Investigation on Effect of Machining Parameters of End Milling on Surface Finish and Temperature Using Taguchi Technique”, International Conference on Modeling, Optimisation and Computing, Noorul Islam University, Kumaracoil, India, April 10-11, 2014.
  • Dr. J. Venkatesan “Performance of Latent Heat Solar Thermal Energy Storage System”, International Conference on Computational Systems in Engineering and Technology, Sri Venkateswara College of Engineering, Chennai, India, March 7-8, 2014.
  • Dr. J. Venkatesan “Review Study on Exergy Analysis of DI Diesel Engine Enriched with Hydrogen (HHO) Intake and Fuelled with Bio-Diesel”, International Conference on Computational Systems in Engineering and Technology, Sri Venkateswara College of Engineering, Chennai, India, March 7-8, 2014.
  • Dr. J. Venkatesan “Effect of Charge Cooling on Engine Performance and Emission”, International Conference on Computational Systems in Engineering and Technology, Sri Venkateswara College of Engineering, Chennai, India, pp. 433-438, March 7-8, 2014.
  • Dr. J. Venkatesan “Development of a Mathematical Model of a Reciprocating Air Compressor with Disc Valve used in Automotive Braking System”, 2006 Spring Technical Conference of the ASME Internal Combustion Engine Division, Aachen, Germany May 8-10, 2006.
  • Dr. J. Venkatesan “Performance Improvement in Automotive Engines Using Vapour Absorption Refrigeration System for Air Conditioning”,SAE International Conference on Future Transportation Technology, Chicago, USA, September 6-9, 2005.
  • Dr. J. Venkatesan “Optimisation Studies of Compact Type Oil Cooler for Automotive Vehicles”,SAE International Conference on Automotive Technology for Vietnam (ICAT 05), Hanoi, 22-24 October, 2005.
  • Dr. J. Venkatesan “Analysis and Performance Prediction of Heat Recovery Steam Generator”,International Conference on Energy and Environmental Technologies for Sustainable Development – Malaviya National Institute of Technology, Jaipur, India, October 8-10, 2004.

    National Conference

  • Dr. J. Venkatesan “Optimization of Machining Parameter of Aluminium Alloy Using Taguchi Based Regression Modeling”, National Conference on Advances in Mechanical Sciences, C.Abdul Hakeem College of Engineering and Technology Melvisharam, India, 12th March 2014.
  • Dr. J. Venkatesan “Effect of EGR on Emission Characteristics of Crude Rice Bran Oil Blend as a CI Engine Fuel at Higher Injection Pressure”, National Conference on Advances in Automotive Technology, Rajalakshmi Engineering College, Chennai, July 2010.
  • Dr. J. Venkatesan “Simulation and Optimisation of Automotive Radiators”, National Conference on Advances in Mechanical Engineering, Vasavi Collge of Engineering, Hyderabad, India, May 13-14, 2005.
  • Dr. J. Venkatesan “Computer Simulation of Direct Expansion Chiller”, National Conference on Global Technologies in Manufacturing and Thermal Sciences, Sethu Institute of Technology, Virudhunagar, India, July 9-10, 2004.
  • Dr. J. Venkatesan “Design Modeling and Analysis of Direct Contact Heat Transfer Device � A Case Study”, National Conference on Advancement in Electrical and Mechanical Engineering, Mailam Engineering College, Mailam, Tindivanam, India, February 20-21, 2004.
  • Dr. J. Venkatesan “Analysis of Axisymmetric Swirling Flows in a Gas Turbine Combustor”, National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University, Coimbatore (March-2003).
  • Dr. J. Venkatesan “Transient Thermal Hydraulic Analysis of Containment of Advanced Heavy Water Reactor (AHWR)”, National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University, Coimbatore (March-2003).
  • Dr. J. Venkatesan “Analysis and Characteristic Prediction of Two Phase Flow in Direct Contact Devices”, National Conference on Fluid Flow and Control, UGC-DRS Centre, Bharathiar University, Coimbatore (March-2003).

    Research contribution

  • Deputed to work with M/S Sundaram Clayton Ltd, a leading automobile braking system manufacturer in Chennai (1-12-2003 to 31-05-2004) to work on a R&D project.
  • Successfully completed R&D project “Modelling and Simulation of Reciprocating Air Compressor of Automotive Braking system” for M/S Sundaram Clayton Ltd, Chennai.

    Consultancy work

  • Modelling and Simulation of NLC1 Compressor of Automotive Braking System for WABCO-TVS (India) Ltd, Chennai. (Rs.1,00,000/-)
  • Modelling and Simulation of NLC2 Compressor of Automotive Braking System for WABCO-TVS (India) Ltd, Chennai. (Rs.1,35,000/-)
  • Experimental work for external Ph.D scholars, PG students and UG students at thermal lab (Earned around Rs.10,00,000/- Lakh till July 2013).

    Funded Project

  • Obtained Rs. 12.00 Lakh from AICTE under MODROBS to complete a project “Performance, Combustion and Emission analysis of Single and Multi cylinder CI engines fuelled with diesel and bio-diesels” (2011-12) Status: Completed

 

Conference / Workshop / FDP

 

  • Organized a Faculty Development and Training Program on “Automotive Air – Conditioning” during 25th November to 31st November 2019 at Automobile Engineering Department, Sri Venkateswara College of Engineering, Pennalur, Sriperumbudur, Chennai
  • Organized a Faculty Development and Training Program on “Engineering Thermodynamics” during 31st May to 06th July 2019 at Automobile Engineering Department, Sri Venkateswara College of Engineering, Pennalur, Sriperumbudur, Chennai
  • Department of Automobile Engineering organized AICTE SPONSORED TWO WEEK FACULTY DEVELOPMENT PROGRAMME on “Theory and Performance Evaluation of Automotive Vehicle Subsystems Using Modern Tools and Equipment” by Dr.J.Venkatesan, Dr.S.Premnath & Mr.J.Dhanabal
  • Organized a National level technical workshop on “RECENT DEVELOPMENTS IN AUTOMOTIVE POWERTRAIN” held at SVCE on 13th May 2016.
  • Organised an ISTE sponsored one day workshop on “RECENT TRENDS ON EMISSION CONTROL IN I.C. ENGINES” on 25th March 2013.

    Lecture Delivered

  • Delivered a Lecture on “Aerodynamic forces and moments. Equation of motion” in the FDT on Vehicle Dynamics using MATLAB during 27th Novemeber to 01st December 2018 at Automobile Engineering Department, Sri Venkateswara College of Engineering, Pennalur, Sriperumbudur, Chennai

    FDP / Workshops Attended

  • Attended a Faculty Development and Training Program on “Automotive Air – Conditioning” during 25th Nonember to 31st November 2019 at Automobile Engineering Department, Sri Venkateswara College of Engineering, Pennalur, Sriperumbudur, Chennai.
  • Advanced Modelling Techniques for heat Transfer Equipments and its Applications, CSIR Sponsored National Level Seminar, KPR Institute of Engineering and Technology, Coimbatore-641407, 01.02.2013 – 02.02.2013.
  • Recent Advances in Engineering Materials, AICTE Sponsored Staff Development Programme, Rajalakshmi Engineering College, Thandalam, Chennai-602105, 18.07.2011 – 23.07.2011.
  • Advanced Modelling Techniques for heat Transfer Equipments and its Applications, CSIR Sponsored National Level Seminar, KPR Institute of Engineering and Technology, Coimbatore-641407, 01.02.2013 – 02.02.2013.

    Resource Person

  • A Technical Seminar on Heat and Mass Transfer, Phodhigai College of Engineering and Technology, Tirupattur, Tamil nadu-635601, 13.03.2014.
  • FDP on Chemical Engineering Thermodynamics-I, A.C. Tech, Anna University, Chennai-600025, 27.11.2014-04.12.2014.
  • Topic: Steam and Internal Combustion Engines on 03.12.2014, 2.00 – 5.00 pm.
  • TEQIP Phase II Sponsored One Week FDP on “Heat Transfer”, Coimbatore Institute of Technology, Coimbatore-641014, 17.10.2014.
  • Five Day Workshop on Faculty Induction Training Programme at Shanmugha College of Engineering, Thanjavur.
  • AICTE-ISTE Summer School on An Approach to Intelligent Machining at SVCE.
  • AICTE-ISTE Winter School on Damage Prevention and Life Enhancement of Industrial Components by Surface Treatment at SVCE.
  • 2nd International SAEINDIA Mobility Conference at IIT Madras Conference on Heat Transfer at IIT Madras.

    Faculty Development Programme at SVCE

  • CII-GBC International Conference on Refrigeration and Air Conditioning at Chennai.
  • SVCE-ISTE (TN & P) Sponsored Three Day Workshop on Computational Fluid Dynamics at SVCE.
  • FDP on Engineering Mechanics at Raja Engineering College, Madurai.
  • Delivered more than 20 technical lectures at Sundaram Clayton Ltd and WABCO (India) LTD, Chennai.
  • Delivered a technical lecture on Heat Transfer at WESTERN THOMSON LTD, Chennai.
  • Delivered a technical lecture on I.C. Engines at NIPPON THERMOSTAT (India) LTD, Gummidipoondi.
  • Delivered a special lecture on Engineering Thermodynamics at Jeppiaar Institute of Technology, Kancheepuram.
  • Handled a technical lecture session of FDP program on Heat and Mass Transfer at St. Joseph Engineering College, Sriperumbudur.
  • Handled a technical lecture session of FDP program on Thermal Engineering at St. Joshop Engineering College, Sriperumbudur.
  • Handled two lecture sessions of FDP program at Velammal Engineering College, Chennai.
  • Attended the AICTE sponsored two week summer school programme on ” Recent Trends In Heat & Mass Transfer” held on 8th to 21th May 2015 at Adhiparasakthi Engineering College conducted by Department of Mechanical Engineering.
  • Attended the AICTE sponsored two week summer school programme on “Recent Advances in Engineering Materials” held at Rajalakshmi Engineering College, Thandalam, Chennai-602105, 18.07.2011 – 23.07.2011.

 

Laboratory Handled
Training Attended
Additional Responsibilities

 

  • Head of the Department
  • Dean – Students’ Welfare
  • Chairman (BoS)
  • Overall Coordinator – Automotive Research Cell
  • Project Coordinator
  • Web Coordinator
  • Grievance Redressal Cell (GRC) Coordinator
  • Member – Medical Benevolent Fund committee

 

Achievements

Anna University recognized Research Supervisor

expand_less
motorchip aiflasksideasketch website toygearbiotechnologydata-complexitypromotioncomputersoftwareweb-design idea-1 creativitymicroscopechemistrymodelassemblyplay-outlined-circular-buttonpausecreative open-bookteamwork-team gaugegoallaboratory mathematicsatommechanicmicroscope-1 factory sketch-1 charitysystempistonscruise envelopefacebook-placeholder-for-locate-places-on-mapssmartphone-callold-typical-phoneuserantennacoding computers-network-interface-symbolsearchgoodwillplay-buttonpause-1 tickleft-arrow