faculty Profile

B.E.-MECHANICAL ENGINEERING-1995-UNIVERSITY OF MADRAS
M.E.-COMPUTER AIDED DESIGN-2001-UNIVERSITY OF MADRAS
Ph.D.-MECHANICAL ENGINEERING-2006-INDIAN INSTITUTE OF TECHNOLOGY

• SVCE, Sriperumbudur-Professor
• ARULMIGU MEENAKSHI AMMAN COLLEGE OF ENGINEERING-Lecturer

• Tribology in Design
• Design for manufacturing Engg. Graphics
• Un conventional machining
• Modern Concept of Engg. Design
• Metrology and Measurement Lab
• Basic Workshop
• Machine Shop

International Journals

• R Ramesh and R Gnanamoorthy, An investigation on fretting wear behaviour of MoS2 bonded coating on AISI 4340 steel, Journal of Engineering Tribology, I. MECH Part J, Vol. 221, pp 41-47, 2007, JIF:0.721 , Citation Count: 1
• R Ramesh and R Gnanamoorthy, Artificial neural network predictions on fretting wear behaviour of structural steel against bearing steel submitted to Journal of Materials Engineering and Performance (ASM International) Vol.16 703-709 2007 JIF:0.639 , Citation Count: 5
• R. Ramesh and R. Gnanamoorthy Effect of post oxidation on the fretting wear performance of liquid nitrided En24 steels, Surface and Coating Technology, Elsevier publication, Vol. 2006, Pp. 3926-3932,2006. JIF:2.3 , Citation Count: 8
• R. Ramesh and R. Gnanamoorthy, (2006) Fretting wear behavior of liquid nitrided structural steel, En24 and bearing steel, En31, Journal of Materials Processing technology, Elsevier publication, Vol. 171, Pp.61-67,2006. JIF: 1.726 , Citation Count: 2
• R Ramesh and R Gnanamoorthy, Effect of hardness on fretting wear behaviour of structural steel, En24 against bearing steel, En31, Materials & Design, Elsevier publication, Vol. 28, Pp. 1447-1452,2006. JIF: 1.750 , Citation Count: 3
• R. Ramesh and R. Gnanamoorthy, Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels, Materials & Design, Elsevier publication, Vol. 27, Pp. 141-146,2005.JIF: 1.750, Citation Count: 14
• M Prem Ananth, Dr R Ramesh, Analysis of sliding behaviour on non-conformal contacting surfaces under shear traction Procedia Engineering , Elsevier Publications, stand alone Volume, August-2012.
• M Prem Ananth, Dr R Ramesh, Tribological Investigation of Nano Composite Coated Titanium Alloy Surfaces Under Unidirectional Sliding , published in, Advanced Materials Research Journal (ISSN: 1022-6680) as a special issue., Trans Tech Publication, stand alone Volume, September 2012
• M Prem Ananth, Dr R Ramesh, Influence of surface texture on Tribological performance of AlCrN nanocomposite coated titanium alloy surfaces, accepted for publication, Journal of Engineering Tribology, Sage publication,2013
• R. Murugan, R. Ramesh, K. Padmanabhan, R. Jeyaraam, S. Krishna, “Experimental Investigation on Static Mechanical Properties of Glass/Carbon Hybrid Woven Fabric Composite Laminates” in Journal of Advanced Materials Research, Transtech Publications, 2013
• R Suresh, P Shruthi, RS Kumar, J Siva, MP Ananth, R Ramesh Experimental Investigation of Nano-Composite Coated Stainless Steel (316L), Surfaces under Unidirectional Sliding, Applied Mechanics and Materials 440, 37-41,201
• Prem Ananth M. and Ramesh R. “Tribological Improvement of Titanium Alloy Surfaces Through Texturing and TiAlN Coating”, Surface Engineering – Maney Publications, Vol. 30, No. 10, pp. 758-762, 2014.
• Prem Ananth M. and Ramesh R. “Reciprocating Sliding Wear Performance of Hard Coating on Modified Titanium Alloy Surface” has been accepted for publication in Tribology Transactions- Taylor & Francis Publications.
• Murugan.R, Ramesh.R and Padmanabhan.K, 2014, ‘Investigation on Vibration Behaviour of Cantilever Type Glass/Carbon Hybrid Composite Beams at Higher Frequency Range using Finite Element Method’, in Advanced Materials Research, vol. 984-985, pp 257-265, Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AMR.984-985.257
• C Senthamaraikannan and R Ramesh, Experimental investigation on vibration characteristics of woven carbon fabric-reinforced composite beams of various cross-sectional shapes, Proceedings of the Institution of Mechanical and Applications Engineers, Part L: Journal of Materials Design, Sage Publications, DOI: 10.1177/1464420714545368
• C. Senthamaraikannan, S.K.SharathKumar, Dr. R. Ramesh, Experimental Investigation on Modal Response of Woven fabric Carbon Composite plate reinforced with particles of micro rubber blended epoxy matrix under Free Vibration Condition, Advanced Materials Research Vols. 984-985 (2014) pp 273-279.
• R.Murugan, R.Ramesh, K.Padmanabhan, Investigation on static and dynamic mechanical properties of epoxy based woven fabric glass/carbon hybrid composite laminates, Procedia engineering, 97(2014) 459-468
• L.Radhaswamy, C.Senthamaraikannan, Dr. R. Ramesh, Investigation of the elastic modulus effect on free vibration characteristics of fiber reinforced polymer composite beams made of various fundamental shapes, Advanced Materials Research Vols. 1088 (2015) pp 401-406.
• Agarshna Murari M, Ashwin Nambi, C.Senthamaraikannan, Dr.R.Ramesh, Experimental Investigation on the Effects of Helically arranged Unconstrained Elastomer Layered Treatment over Structural Steel Beams of Various Cross-section, for Improved Vibration Characteristics, International Journal for Technological Research in Engineering, Volume 2, Issue 7, March-2015,GIF Impact factor: 1.46,2347-4718(online), 2347-9450(print)
• R. Murugan, R. Ramesh, K. Padmanabhan, Experimental Investigation on the Different Aerial Density of Woven Fabric Glass, Carbon and its Hybrid Composite Beam Subjected to Free Vibrating Condition, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 9 No.26 (2014),9423-9427
• C.Senthamaraikannan, L.Radha swamy, Dr.R.Ramesh, Comparative Study on Vibration characteristics of Straight and Curved beam of box shaped cross section subjected under Cantilever end condition, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 8 (2015).
• Dr.R.Ramesh, Siddharth.B, C.Senthamaraikannan, Study of Free Vibration Characteristics of Carbon Epoxy based Composite Beams, Applied Mechanics and Materials Vols. 813-814 (2015) pp 1042-1046,Trans Tech Publications, Switzerland
• R. Murugan, R. Ramesh, K. Padmanabhan, Investigation on Mechanical Behaviour and Vibration Characteristics of Thin Walled Glass/Carbon Hybrid Composite Beams Under Fixed-Free Boundary Condition, Mechanics of Advanced Materials and Structures, Taylor & Francis, D.O.I.:10.1080/15376494.2015.1056394, 1537-6494 (Print), 1537-6532 (Online),Annexure I,SI.No. 5952, Page 909-916, Volume 23, 2016 – Issue 8, June 2016
• M.Premananth, R.Ramesh, Sliding wear characteristics of solid lubricant coating on titanium alloy surface modified by laser texturing and ternary hard coatings, Transactions of Non Ferrous Metals Society of China, 1003-6326, Vol. 27(2017) pp.839−847.
• Srivathsan.A, B.Vijayaram, R.Ramesh, Gokuldass, Investigation on Mechanical Behaviour Of Woven Fabric Glass/Kevlar Hybrid Composite Laminates Made Of Varying Fibre Inplane Orientation And Stacking Sequence, Materials Today Procedings, Elseveir, 2017
• K.Madhivanan, M.Senthilkumar, R.Ramesh, Vibration Signal Responses Classification in AA6063 Aluminium Alloy Friction Stir Welded joint Using Optial Neural Network, International Journal of Business Intelligence and Data mining, Inderscience Publishers, 2017
• C.Senthamaraikannan, Dr.R.Ramesh, Evaluation of Mechanical and Vibration Behavior of Hybrid Epoxy Carbon Composite Beam Carrying CTBN Rubber And Nano Silica Particulates, Proceedings of the Institution of Mechanical and Applications Engineers, Part L: Journal of Materials Design, Sage Publications, Published June 27, 2018, https://doi.org/10.1177/1464420718784315
• R. Gokuldass,R. Ramesh Mechanical Strength Behavior of Hybrid Composites Tailored by Glass/Kevlar Fibre-Reinforced in Nano-Silica and Micro-Rubber Blended Epoxy, Silicon Springer Publications, 08 January 2019 https://doi.org/10.1007/s1263

CONFERENCES PUBLICATIONS:

INTERNATIONAL CONFERENCE

• R. Ramesh and R. Gnanamoorthy, Fretting wear behavior of liquid nitrided En24 steel fretted with hardened En 31 bearing steel, Proc of International Conference on Advances in Surface Treatment Research and Application, Nov 2003, Hyderabad, 321-326.
• R. Ramesh and R. Gnanamoorthy, Effect of Nitriding condition on fretting wear of En24 steel, International Conference on Heat Treatment ASM, January 2004, Chennai, 29.
• R. Ramesh and R. Gnanamoorthy, Effect of post oxidation on the fretting wear performance of liquid nitrided En24 steels, International Conference on Surface Engineering, Aug 2004, Bangalore, 131-136.
• R. Ramesh and R. Gnanamoorthy, Fretting wear behaviour of borided structural steel, En24, against bearing Steel, En31, 1st International Conference on Advanced Tribology, Dec 2004, Singapore, B-78.
• R. Ramesh and R. Gnanamoorthy, An investigation on fretting wear properties of MoS2 bonded solid lubricant coatings, Indo-Japan Conf on Damage Tolerant Design &Materials, IIT Madras, Dec 2004, 175-178.
• Ramesh R, Raghavendran M, Raghuraman R “Study and evaluation of active electrostatic bearing supporting a cylindrical rotar” International conference on Emerging research and advances in Mechanical Engineering, ERA2009 Velammal Engineering College,Tamil Nadu, India19-21 March2009
• Ramesh R, Sridharan V, Gnanamoorthy R “Analysis of Sliding Behaviour of Structural Steel En 24 against Bearing Steel En 31 under Fretting Load Conditions” at Conference on Tribology of automotive system , held at Indian Institute of Technology – Delhi(IIT D) during 11 –12 Dec. 2009.
• Senthamarai Kannan.C, Ramesh .R “Analysis of the damping performance of thin walled composite structures using FEM” International Conference on Advance Materials and Building Sciences”proceedings, held at Vellore Institute of Technology(VIT) – University –Vellore during 14 – 16 Dec. 2009.
• Ramesh R, V.Sridharan. “Analysis of Borided EN24 structural steel against Bearing Steel EN 31 under Fretting Conditions” International Conference on Advance Materials and Building Sciences”proceedings, held at Vellore Institute of Technology(VIT) – University –Vellore during 14 – 16 Dec. 2009.
• Ramesh .R , Gurusamy .V , Gouthaman.S “Contact Analysis Of Flexible Jaw Coupling Using Finite Element Method” ” at “Conference on Tribology of automotive system , held at Indian Institute of Technology – Delhi(IIT D) during 11 –12 Dec. 2009.
• Ramesh .R ,Prem ananth.M, “Analysis of Contact behaviour of Stainlesss steel Cam over Brass Roller Follower for automotive Applications Using FEM” Conference on Design and Manufacturing Issues in Automotive and Allied Industries IPRoMM-2009 held at Indian Institute of Technology – Chennai (IITM) during 10-11 July 2009.
• Senthamarai Kannan.C, Ramesh .R “Investigation on the Passive Damping performance of various shapes of Thin walled Carbon/Epoxy Composite Beams with different aspect ratio using Finite element Method”, International Conference on Advances in Mechanical Engineering – ICAM2010, held at NIT, Surat during 4-6,January 2010.
• Ramesh .R , Gurusamy .V, Gouthaman.S “Effect of Aspect Ratio on the Structural Behaviour of Various Shapes of Flexible Jaw Coupling using Finite Element Analysis”, International Conference on Advances in Mechanical Engineering – ICAM2010, held at NIT, Surat during 4-6,January 2010.
• Senthamarai Kannan.C, Ramesh .R “Investigation on the Damping performance of various shapes of Thin walled Carbon/Epoxy Composite Beams”, International Symposium for Research Scholars (ISRS-2010) on Metallurgy, Materials Science and Engineering, Accepted for publication and going to be held at Indian Institute of Technology (IITM) – Chennai During Dec 20 – 22, 2010
• R Murugan, K. Padmanabhan, R.Ramesh M Rajesh “Hybrid effect on damping behavior of epoxy based woven fabric composites beams”, International conference on Advancements in Polymeric Materials held at CIPET, Chennai During March 25-27, 2011
• Balaji S, Senthamarai Kannan.C, Ramesh.R “Dynamic analysis of Woven Fabric carbon/Epoxy composite Beams” International conference on Advancements in Polymeric Materials held at CIPET, Chennai During, March 25-27, 2011
• Madhavan S, Ramesh.R , Shankar S” Investigation on the Contact Behavior of Rolling Bearing Assembly under Various Tolerance Level” 5thInternational Conference on Advances in. Mechanical. Engineering. (ICAME-2011), held at National Institute of Technology (NIT ) Surat, 06 – 08 June 2011.
• M Prem Ananth, Dr R Ramesh “Analysis of Sliding Behaviour of Non Conformal Contacting Surfaces Subjected to Shear Traction” International Conference on Modelling Optimization and Computing (ICMOC 2012), held at Noorul Islam University, Kumaracoil, 10-11 April 2012.
• Sathish Kumar R, Dr R Ramesh “Investigation And Analysis of Clutch Disc System Under Dynamic Performance” International Conference on Recent Advances in Mechanical Engineering (INCRAME 2012), held at Dr. M.G.R University, Chennai, 19-20 April 2012.
• C.Senthamaraikannan, B.Nagarjun , S.Manishankar , Dr.R.Ramesh “ Experimental Investigation on the performance of passive damping in rectilinear and curved glass fiber/epoxy composite beams subjected under different boundary conditions.” ESTCON 2012 (ICCOEE-2012), held at Petronas Technological University-Malaysia from 12th June to 16th June -2012
• M Prem Ananth, Dr R Ramesh, Tribological Investigation of Nano Composite Coated Titanium Alloy Surfaces Under Unidirectional Sliding , accepted for publication, 3rd International Conference on Manufacturing Science and Technology – ICMST 2012, Delhi Auguest 18-19,2012
• M. S. Kumar, R. Ramesh Structural and contact analysis of automotive leaf spring subjected to dynamic loads using three dimensional finite element approach, , Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi,5-8 December,2012
• R. Murugan, K. Padmanabhan, R. Ramesh Vibration characteristics of thin walled hybrid carbon composite beams under fixed free boundary condition, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, 5-8 December,2012
• C. Senthamaraikannan, R. Ramesh, Experimental investigation on modal analysis of carbon fiber reinforced composite beams made up of various cross sectional shapes, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, 5-8 December,2012
• R Murugan, Dr R Ramesh, Vibration Characteristics of Woven Fabric Glass/Carbon Hybrid Composite Beams using Finite Element Method 3rd International Conference on Recent Advances in Material Processing Technology (RAMPT’13) held at National Engineering College, Kovilpatti Jan 07-09, 2013
• B.Karthik, M.Prem Ananth, Dr.R.Ramesh, “Tribological Investigation of Titanium Alloy Surfaces under Reciprocating Sliding” has been accepted in the International Conference on Engineering Materials and Process, organized by Tagore Engineering College, Chennai going to held on May-2013.
• Dinesh Kumar T, Dr. R. Ramesh, “Analysis of Coupled Internal External flow of Aircraft Configuration using Computational Fluid Dynamics”, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
• Arul Kumar .M, R. Murugan, Dr. R. Ramesh, Dr. K. Padmanabhan, “An Investigation on Static Mechanical properties of epoxy based glass/carbon woven fabric hybrid composites”, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
• C. Senthamaraikannan, Dr. R. Ramesh, B. Kamesh, “Investigation of Hybrid Carbon Channel Beam under Free Vibration Condition”, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
• M.Premananth, Dr. R. Ramesh, Unidirectional sliding wear performance of bilayer PVD coating on modified titanium alloy surface, INTERFINISH-SERIA 2013, Rajalakshmi Engineering College, August 2013.
• C. Senthamaraikannan, S.K.SharathKumar,Dr. R. Ramesh, “ Experimental investigation on Modal response of woven fabric carbon composite plate reinforced with particles of micro rubber blended epoxy matrix under free vibration condtion”, International conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014) , 7th & 8th march 2014, held at Ponjesly College of Engineering.
• R. Murugan, R. Ramesh, K. Padmanabhan, R. Jeyaraam, S. Krishna, ”Experimental Investigation on Static Mechanical Properties of Glass/Carbon Hybrid Woven Fabric Composite Laminates” in First International Manufacturing Engineering Conference – (imec2013), organized by the Faculty of Manufacturing Engineering, Universiti Malaysia Pahang held on 1-3 July 2013 at Bukit Gambang Resort City, Gambang, Kuantan, Pahang., Malaysia.
• Prem Ananth, M, Ramesh, R 2014, ‘Tribological Performance of Hard and Wear Resistance Composite Coating on Modified Titanium Alloy Surfaces Under Reciprocating Sliding’, International Conference on Advances in Tribology (ICAT14), NIT Calicut, Kerala, Feb, 21-24, 2014. (Awarded best paper in the conference)
• R. Murugan, R. Ramesh, K. Padmanabhan, S. Sheril, ”Investigation on Mechanical Properties of Woven Fabric Glass, Carbon and its Hybrid Laminates made off Different range of Fibre Volume Fraction and Aerial Density” in International Conference on Computational Systems in Engineering and Technology (ICCSET2014), held on 7-8 March 2014 at Sri Venkateswara College of Engineering, Sriperumbudur.
• R. Murugan, R. Ramesh, K. Padmanabhan, “Investigation on Vibration Behaviour of Cantilever Type Glass/Carbon Hybrid Composite Beams at Higher Frequency Range using Finite Element Method” in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014) held on 7-8 March 2014 at Ponjesly College of Engineering, Nagercoil.
• C. Senthamaraikannan, Dr. R. Ramesh, “Experimental Investigation on Vibration and Modal Response of Woven Carbon Fabric Epoxy Composite Curved Beams of Various fundamental Shapes”, in International Conference on Computational Systems in Engineering and Technology (ICCSET2014), held on 7-8 March 2014 at Sri Venkateswara College of Engineering, Sriperumbudur.
• M.Anandhi,Dr. R. Ramesh, “ Design and Analysis of Vertical axis wind turbine for domestic purpose”, International conference on Recent Advances in Mechanical Engineering and Interdisciplinary developments, 7th & 8th march 2014, held at Ponjesly College of Engineering. (Awarded best paper in the conference)
• Murugan,R, Ramesh,R& Padmanabhan, K 2014, ‘Experimental Investigation on the Different Aerial Density of Woven Fabric Glass, Carbon and its Hybrid Composite Beam Subjected to Free Vibrating Condition’, in International Conference on Modelling Optimization and Computing (ICMOC 2012), held at Noorul Islam University, Kumaracoil, during 10-11 April 2014.
• C.Senthamaraikannan, L.Radha swamy, Dr.R.Ramesh, “Comparative Study on Vibration Characteristics of Straight and Curved Beam of Box Shaped Cross Section Subjected under Cantilever End Condition”, International Conference on Modeling Optimisation and Computing, Department Of Mechanical Engineering(ICMOC-2014), organised by Nooral Islam University, Kumaracoil , India jointly with Universiti Teknologi, Mara, Malayasia & Oulun Yliopisto, University of Oulu, Oulu, Finland, 10th & 11th April 2014. (Awarded best paper in the conference)
• V.M. Jothiprakash, M. Prem Ananth, R.Ramesh, “Reciprocating sliding behaviour of Solid Lubricant Coating over modified Titanium Alloy Surfaces”, at Internatinal Conference on Computational Intelligence & Advanced Manufacturing Research (ICCIAMR-2014) haeld at Vels University, Chennai during 2nd & 3rd May,2014
• Murugan,R, Ramesh,R& Padmanabhan, K 2014, ‘Investigation on Static and Dynamic Mechanical Properties of Epoxy Based Woven Fabric Glass/Carbon Hybrid Composite Laminates’ in 12th Global Congress on Manufacturing and Management, (GCMM 2014), held at VIT University, Vellore, during 8-10 December 2014.
• L.Radhaswamy, C.Senthamaraikannan, Dr. R. Ramesh, Investigation of the elastic modulus effect on free vibration characteristics of fiber reinforeced polymer composite beams made of various fundamental shapes, International conference on Advance in materials, (ICAM 2014), Shangai, China, 14-15 December 2014.
• Arun kumar D, C.Senthamaraikannan, Dr.R.Ramesh, Evaluating forced vibration characteristics of carbon fiber reinforced composite beams of various cross sectional shapes using finite element analysis, International Conference on Polymer Composites, funded by TEQIP Phase-II, December 19th-20th, 2014, National Institute of Technology, NITK Surathkal.
• Agarshna Murari M, Ashwin Nambi, C.Senthamaraikannan, Dr.R.Ramesh, Experimental Investigation on the Effects of Helically arranged Unconstrained Elastomer Layered Treatment over Structural Steel Beams of Various Cross-section , for Improved Vibration Characteristics, International Conference on Newest Drift in Mechanical Engineering ICNDME -14, 20th – 21st December, 2014 , M. M. University, Mullana (Ambala).
• S.Nandhini, Dr.R.Ramesh, Design and Analysis of modified shock Absorber system of landing gear for lighter aircraft. International conference on Advances in Materials and Manufacturing, (INTCOMM 2015) held on 3rd & 4th March 2015, at Hindustan College of Engineering.
• Sriram R, , Ramesh R and Premananth M, Investigation on contact behaviour of TiAlN and AlCrN coated Titanium alloy substrate over bearing steel subjected under reciprocating sliding condition, 1st International Conference on Advanced Engineering and Technology for Sustainable Development (ICAETSD 2015) at Karpagam College of Engineering, Coimbatore, 5th March 2015.
• Dr.R.Ramesh, Siddharth.B, C.Senthamaraikannan, Study on free vibration characteristics of carbon epoxy based composite beams, International conference on mechanical and manufacturing engineering, ICMME 2015, Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya,2 and 3rd April 2015. (Awarded best paper in the conference)
• Krishnaswamy V, Dr.R.Ramesh, Investigation on Tribological properties of PEEK polymer reinforced with PTFE and SiO2 Nano Particles, TEQIP II sponsored International conference on Advances in Materials, Manufacturing and Applications, AmmA -2015, Department of Metallurgical and Materials engineering, National Institute of Technology, Tiruchirappalli, 9-11 April 2015.
• G.Vignesh, N.S.TharunKrishna, C.Senthamaraikannan, R.Ramesh, Dynamic Mechanical behaviour of Carbon fibre based Composite laminate made of micro rubber blended epoxy matrix for Structural Applications, International conference on Aerospace and Mechanical Engineering, TKM College of Engineering, Kollam, 14-16 Dec 2016.
• K.Rohit Krishna, N.Navin Kamesh, R Ramesh, R Murugan, Experimental investigation on stacking sequence effects of surface treated Jute/Kenaf Hybrid Composite laminates under Flexural loading Condition, International conference on Aerospace and Mechanical Engineering, TKM College of Engineering, Kollam, 14-16 Dec 2016.
• Vinoth Kumar.M, R.Ramesh, C.Senthamarai Kannan. “Experimental And Analytical Free Vibration Study On Nano-Silica Based Carbon Composite Beams Of Basics Shapes”. International Conference on Recent Trends in Engineering and Technology (ICET2016)”, Department Of Mechanical Engineering, St.Joseph’s Institute Of Technology, Chennai, Dated on 28th and 29th of April 2016.
• Senthamaraikannan C, Ramesh R, Rishi S Vaidya V and B.Vijayaram B, Experimental Forced Vibration Response Of Micro Rubber And Nano Silica Particles Added Carbon Epoxy Composite Beams For Various Cross Sectional Shapes, The 7th International Conference On Mechanical And Aerospace Engineering (ICMAE 2016), London, United Kingdom, 18-22 July 2016
• Srivathsan A, B Vijayaram, Dr.R.Ramesh, Gokuldass, Investigation On Mechanical Behavior Of Woven Fabric Glass/Kevlar Hybrid Composite Laminates Made Of Varying Fibre Inplane Orientation And Stacking Sequence, International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016).during 7-9th July 2016, MLR Institute of technology, Hyderabad.
• R.Murugan, R.Ramesh and K. Pdmanabhan, Experimental Study on Fatigue-Vibration Interactions of Cyclically Loaded FRP Composite Cantilever Beams made of Glass/Carbon Layered Arrangements, First Structural Integrity Conference and Exhibition (SICE-2016), Indian Institute of Science, IISc, Bangalore, 24th June 2016
• C.Senthamaraikannan, M. Monish Kumbhat and Dr.R.Ramesh, Investigation on Experimental Modal Response of Hybrid Carbon Composite Plates, Composed of Varying Weight Fraction of Micro Rubber Particulates, 7 th International conference on Advances in Science Engineering and Technology (7 ICASET 2017), April 24th 2017 at Rajiv Gandhi Institute of Technology, Bangalore, India
• R.Ramesh, V.Vishal C.Senthamaraikannan, Experimental Free Vibration Characteristics of Micro-Rubber Blended Carbon Composite Plates of Varying Thickness Conditions, 2nd International Conference on Recent Trends in Engineering and Technology, St. Joseph’s Institute of Technology, 5-6th May 2017
• T.S.Frank Gladson , P.K.Dinesh Kumar , R.Ramesh, Mechanical Behavior of Nanowire Al2O3 Reinforced PEEK-PTFE Hybrid Composite for Structural Element Applications, 2nd International Conference on Recent Trends in Engineering and Technology, St. Joseph’s Institute of Technology, 5-6th May 2017.
• T.S. Frank Gladson, P.K. Dinesh Kumar and R.Ramesh “Investigation of Mechanical and Tribological Behaviour of Nano Al2o3 Reinforced PEEK/PTFE Hybrid Composite for Structural Application 10th International Conference on Precision, Meso,Micro and Nano Engineering (COPEN10), DEC 7-9 2017 ,Held at, Indian Institute of Technology Madras, Chennai
• T.S. Frank Gladson, P.K. Dinesh Kumar , R.Ramesh, Tribological Behavior of Nanowire Al203 Reinforced PEEK-PTFE Hybrid Composite for Structural Element ApplicationsS, International Conference on Composite Materials and Structures- ICCMS 2017,Hyderabad, 27-29th December 2017
• R.Ramesh, C.Senthamaraikannan, Niranjan Suresh, B.Lokesh, Study on the influence of nano sized silica reinforcement in micro rubber blended epoxy carbon composite laminate subjected under dynamic mechanical analysis, 4th International Conference on Materials and Manufacturing Engineering (ICMME-2019) organized by Department of Mechanical Engineering, SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kancheepuram, India, held on March 21 & 22, 2019. – Received Best paper Award
• R. Murugan ,R. Ramesh , K. Padmanabhan, Influence of Stacking Sequence on Mechanical Properties And Vibration Characteristics Of Glass/Carbon Hybrid Plates With Different Fabric Areal Densities, ICONS 2018, Second International Conference On Structural Integrity ,14-17 December, 2018, IITM, Chennai, India, -Received Best paper Award

NATIONAL CONFERENCE

• R. Ramesh and R. Gnanamoorthy, Fretting wear behaviour of as received, through hardened En24 steel against bearing steel, Proceedings of 11th National Conference on Machines and Mechanisms, IIT New Delhi, Dec2003, 660-666
• Ramesh .R, Sutan Kumar K Analysis of rolling contact behavior of CAM-FOLLOWER system using FEM Conferene on Challenges ad innovative practice in Design held at Kalasalingam University during March 12-15,2008.
• Ramesh .R , Gouthaman.S, C.Senthamaraikannan, “Analysis of Flexible jaw coupling using FEM” National conference on recent trends in Mechanical Engineering held at Pavai Engineering College during24-25 April 2009
• R.Ramesh, Prem ananth.M “Investigation on the Effect of Roller Follower Material on the Contact Behaviour of Stainless Steel Cam for Automotive Applications Using FEM” at Conference on Tribology of automotive system , held at Indian Institute of Technology – Delhi(IIT D) during 11 –12 Dec. 2009.
• R.Ramesh, Prem ananth.M “Analysis of Sliding Behavior of Non-Conformal Contacting Surfaces Subjected to Shear Traction”, National Conference on “Advances in Mechanical Engineering” – AIM ENGG 2011, Accepted for publication going to be held at Manipal Institute of Technology(MIT), Manipal , During 03 – 05th Jan, 2011
• R Murugan, R.Ramesh B.Perumal “Effect of Damping behavior on Fatigue characteristics of modified FRP Laminates” Advances in Mechanical Engineering – AIM ENGG 2011, held at Manipal Institute of Technology(MIT), Manipal , During 03 – 05th Jan, 2011
• K. Subramani, R.Ramesh, Amarprakash, “Simulation of high velocity impact on composite targets using advanced computational techniques” National Conference onRecent trends in Mechanical engineering-RTME2011, March 25-26 held at GKM college of engineering and technology,Chennai.
• Sudeep Ambare, Sujay Suresh, R. Ramesh “Design and fabrication of electric vehicle for the differently abled”, National Conference on Recent perspectives in Mechanical Engineering (REPMEC-2011) April 1-2 2011 held at Sri Venkateswara College of Engineering, sriperumbudur .
• Shiva Kumar M, Dr R Ramesh “Static Contact Analysis of Semi Elliptic Leaf Spring using 3D FEM ”Conference on Mechanical Engineering and Technology (COMET 2012), held at IT-BHU, Varanasi, 02-04 March 2012.(Awarded best paper in the conference)
• Sravan Kumar Josyula, R Murugan, Dr R Ramesh “Vibration Characteristics of Modified FRP Laminates” Research Trends in Mechanical Engineering (NCRTME 2012), held at VELS University, Chennai, 10 March 2012
• Selvaraju P, Premananth M, Dr R Ramesh “ Analysis of Sliding Behavior of Coated Surfaces Under Shear Traction” Research Trends in Mechanical Engineering (NCRTME 2012), held at VELS University, Chennai, 10 March 2012
• P Anand Kannan, R Murugan, Dr R Ramesh “Design & Development of Fatigue Testing Facility For Investigating The Behavior of Hybrid Composite” National Conference on Recent Trends in Mechanical Engineering (NCRTIME 2012), held at Saveetha University, Chennai, 22 March 2012. (Awarded best paper in the conference)
• B Umamaheswaran, C Senthamarai Kannan, Dr R Ramesh “Investigation on Structural Beams Made Up of Hybrid Carbon Composites” National Conference on Polymers & Composites in Medicine, Engineering and Defence (PCMED 2012), held at Velammal Engineering College, Chennai, 24 March 2012.
• G.R.Balaji, Dr.R.Ramesh “Wear and friction characteristics of iron powder sintered with nano sized silicon carbide” National conference on Emerging Trends in Design, Thermal and Manufacturing(ETDTM 2013), held at Saveetha Engineering College, Chennai, April, 2013.
• S.Arun, J.Sivaramapandian, R.Ramesh, “Evaluation of Mechanical properties of hybrid Aluminum composites reinforced with boron carbide and aluminum oxide particulars”, Proceedings of National conference on Advances in Mechanical engineering (NME’2015) ,Regional office, Anna University, Tirunelveli region, Tirunelveli -627007, 30th April 2015.
• D.Rajesh, R.Murugan, Dr.R.Ramesh, “ An investigation on effects of fatigue load on vibration characteristics of woven fabric glass/ carbon hybrid composite beam using fixed free end condition using finite element method” Proceedings of National conference on Advances in Mechanical engineering (NME’2015) ,Regional office, Anna University, Tirunelveli region, Tirunelveli -627007, 30th April 2015.
• V.P.Yuvaraj, R.Murugan, R.Ramesh, “ Investigation on Mechanical properties of woven fabric kenaf/jute hybrid composite laminates of various stacking sequences”, Proceedings of National conference on Advances in Mechanical engineering (NME’2015) ,Regional office, Anna University, Tirunelveli region, Tirunelveli -627007, 30th April 2015.
• S.Nandhini, Dr.R.Ramesh, “ Study on modified oleo strut shock absorber system extended for lighter aircraft, subjected under different sinking speed using CFD approach” 2nd National conference on Innovative & Emerging trends in engineering and Technology (NCIETET’15), Panimalar institute of technology, Chennai – 600123.14th May 2015.
• B.Prabhakaran, C.Senthamarai Kannan, R.Ramesh. ”Experimental Free Vibration Characteristics Of Nano-Silica Reinforced Carbon Composite Beams with Varying Weight Fraction”. National Conference On” Recent Advances In Mechanical Engineering”, Department Of Mechanical Engineering, National Engineering College, Kovilpatti, Dated on 1st April 2016.

• Assistant Dean(Academics)
• Assistant HOD(Mechanical Engg .Dept.)
• Class Committee Chairperson
• UG Project Coordinator
• UG Project review member
• Academic Objective Coordinator
• Syllabus Sub Committee member(UG/PG)-Design Stream