Profile
Name Dr. R. RAMESH
Designation Assistant Head of the Department
Areas of Interest Tribology Mechanical Behaviour of Engineering Materials Vibration
Room No. 4010
Intercom No. 403
Mobile 9445247374
Email Id (Official) rameshraja@svce.ac.in
Email Id (Personal) ramesh_rajagopal20@yahoo.co.in
Qualification

Ph.D.-MECHANICAL ENGINEERING-2006-INDIAN INSTITUTE OF TECHNOLOGY
M.E.-COMPUTER AIDED DESIGN-2001-UNIVERSITY OF MADRAS
B.E.-MECHANICAL ENGINEERING-1995-UNIVERSITY OF MADRAS

Academic Experience
  • SVCE, Sriperumbudur-Assistant Professor
  • ARULMIGU MEENAKSHI AMMAN COLLEGE OF ENGINEERING-Lecturer
  • ARULMIGU MEENAKSHI AMMAN COLLEGE OF ENGINEERING, VADAMAVANDAL-Lecturer
Courses Handled
  • Tribology in Design
  • Design for manufacturing
  • Engg. Graphics
  • Un conventional machining
  • Modern Concept of Engg. Design
  • Metrology and Measurement Lab
  • Basic Workshop
  • Machine Shop
Research & Consultancy

List of publications
International journals

  • R Ramesh and R Gnanamoorthy, An investigation on fretting wear behaviour of MoS2 bonded coating on AISI 4340 steel , Journal of Engineering Tribology, I. MECH Part J, Vol. 221,Pp41-47,2007. JIF:0.721 , Citation Count: 1
  • R Ramesh and R Gnanamoorthy, Artificial neural network predictions on fretting wear behaviour of structural steel against bearing steel submitted to Journal of Materials Engineering and Performance (ASM International) Vol.16 703-709 2007 JIF:0.639 , Citation Count: 5
  • R. Ramesh and R. Gnanamoorthy Effect of post oxidation on the fretting wear performance of liquid nitrided En24 steels, Surface and Coating Technology, Elsevier publication, Vol. 2006, Pp. 3926-3932,2006. JIF:2.3 , Citation Count: 8
  • R. Ramesh and R. Gnanamoorthy, (2006) Fretting wear behavior of liquid nitrided structural steel, En24 and bearing steel, En31, Journal of Materials Processing technology, Elsevier publication, Vol. 171, Pp.61-67,2006. JIF: 1.726 , Citation Count: 2
  • R Ramesh and R Gnanamoorthy, Effect of hardness on fretting wear behaviour of structural steel, En24 against bearing steel, En31, Materials & Design, Elsevier publication, Vol. 28, Pp. 1447-1452,2006. JIF: 1.750 , Citation Count: 3
  • R. Ramesh and R. Gnanamoorthy, Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels, Materials & Design, Elsevier publication, Vol. 27, Pp. 141-146,2005.JIF: 1.750, Citation Count: 14
  • M Prem Ananth, Dr R Ramesh, Analysis of sliding behaviour on non-conformal contacting surfaces under shear traction Procedia Engineering , Elsevier Publications, stand alone Volume, August-2012.
  • M Prem Ananth, Dr R Ramesh, Tribological Investigation of Nano Composite Coated Titanium Alloy Surfaces Under Unidirectional Sliding , published in, Advanced Materials Research Journal (ISSN: 1022-6680) as a special issue., Trans Tech Publication, stand alone Volume, September 2012
  • M Prem Ananth, Dr R Ramesh, Influence of surface texture on tribological performance of AlCrN nanocomposite coated titanium alloy surfaces, accepted for publication,Journal of Engineering Tribology, Sage publication,2013
  • R. Murugan, R. Ramesh, K. Padmanabhan, R. Jeyaraam, S. Krishna, �Experimental Investigation on Static Mechanical Properties of Glass/Carbon Hybrid Woven Fabric Composite Laminates� in Journal of Advanced Materials Research, Transtech Publicatons. ,2013
  • R Suresh, P Shruthi, RS Kumar, J Siva, MP Ananth, R Ramesh Experimental Investigation of Nano-Composite Coated Stainless Steel (316L), Surfaces under Unidirectional Sliding, Applied Mechanics and Materials 440, 37-41,201
  • Prem Ananth M. and Ramesh R. �Tribological Improvement of Titanium Alloy Surfaces Through Texturing and TiAlN Coating�, Surface Engineering � Maney Publications, Vol. 30, No. 10, pp. 758-762, 2014.
  • Prem Ananth M. and Ramesh R. �Reciprocating Sliding Wear Performance of Hard Coating on Modified Titanium Alloy Surface� has been accepted for publication in Tribology Transactions- Taylor & Francis Publications.
  • C Senthamaraikannan and R Ramesh, Experimental investigation on vibration characteristics of woven carbon fabric-reinforced composite beams of various cross-sectional shapes, Proceedings of the Institution of Mechanical and Applications Engineers, Part L: Journal of Materials Design, Sage Publications, DOI: 10.1177/1464420714545368
  • C. Senthamaraikannan, S.K.SharathKumar, Dr. R. Ramesh, Experimental Investigation on Modal Response of Woven fabric Carbon Composite plate reinforced with particles of micro rubber blended epoxy matrix under Free Vibration Condition, Advanced Materials Research Vols. 984-985 (2014) pp 273-279.
  • R.Murugan, R.Ramesh, K.Padmanabhan, Investigation on static and dynamic mechanical properties of epoxy based woven fabric glass/carbon hybrid composite laminates, Procedia engineering, 97(2014) 459-468
  • L.Radhaswamy, C.Senthamaraikannan, Dr. R. Ramesh, Investigation of the elastic modulus effect on free vibration characteristics of fiber reinforeced polymer composite beams made of various fundamental shapes, Advanced Materials Research Vols. 1088 (2015) pp 401-406.

CONFERENCES PUBLICATIONS:

IN INTERNATIONAL CONFERENCES

  • R. Ramesh and R. Gnanamoorthy, Fretting wear behavior of liquid nitrided En24 steel fretted with hardened En 31 bearing steel, Proc of Int Conf on Advances in Surface Treatment Research and Application, Nov 2003, Hyderabad, 321-326.
  • R. Ramesh and R. Gnanamoorthy, Effect of nitriding condition on fretting wear of En24 steel, Int Conf on Heat Treatment ASM, January 2004, Chennai, A29.
  • R. Ramesh and R. Gnanamoorthy, Effect of post oxidation on the fretting wear performance of liquid nitrided En24 steels, Int Conf on Surf Engg, Aug 2004, Bangalore, 131-136.
  • R. Ramesh and R. Gnanamoorthy, Fretting wear behaviour of borided structural steel, En24, against bearing Steel, En31, 1st Int Conf on Advanced Tribology, Dec 2004, Singapore, B-78.
  • R. Ramesh and R. Gnanamoorthy, An investigation on fretting wear properties of MoS2 bonded solid lubricant coatings, Indo-Japan Conf on Damage Tolerant Design &Materials, IIT Madras, Dec 2004, 175-178.
  • Ramesh R, Raghavendran M,Raghuraman R �Study and evaluation of active electrostatic bearing supporting a cylindrical rotar� International conference on Emerging research and advances in Mechanical Engineering, ERA2009 Velammal Engineering College,Tamil Nadu, India19-21 March 2009
  • Ramesh R, Sridharan V, Gnanamoorthy R �Analysis of Sliding Behaviour of Structural Steel En 24 against Bearing Steel En 31 under Fretting Load Conditions� at Conference on Tribology of automotive system , held at Indian Institute of Technology � Delhi(IIT D) during 11 �12 Dec. 2009.
  • Senthamarai Kannan.C, Ramesh .R �Analysis of the damping performance of thin walled composite structures using FEM� International Conference on Advance Materials and Building Sciences�proceedings, held at Vellore Institute of Technology(VIT) – University �Vellore during 14 � 16 Dec. 2009.
  • Ramesh R, V.Sridharan.V �Analysis of Borided EN24 structural steel against Bearing Steel EN 31 under Fretting Conditions� International Conference on Advance Materials and Building Sciences�proceedings, held at Vellore Institute of Technology(VIT) – University �Vellore during 14 � 16 Dec. 2009.
  • Ramesh .R , Gurusamy .V , Gouthaman.S �Contact Analysis Of Flexible Jaw Coupling Using Finite Element Method� � at �Conference on Tribology of automotive system , held at Indian Institute of Technology � Delhi(IIT D) during 11 �12 Dec. 2009.
  • Ramesh .R ,Prem ananth.M, �Analysis of Contact behaviour of Stainlesss steel Cam over Brass Roller Follower for automotive Applications Using FEM� Conference on Design and Manufacturing Issues in Automotive and Allied Industries IPRoMM-2009 held at Indian Institute of Technology � Chennai (IITM) during 10-11 July 2009.
  • Senthamarai Kannan.C, Ramesh .R �Investigation on the Passive Damping performance of various shapes of Thin walled Carbon/Epoxy Composite Beams with different aspect ratio using Finite element Method�, International Conference on Advances in Mechanical Engineering � ICAM2010, held at NIT, Surat during 4-6,January 2010.
  • Ramesh .R , Gurusamy .V , Gouthaman.S �Effect of Aspect Ratio on the Structural Behaviour of Various Shapes of Flexible Jaw Coupling using Finite Element Analysis�, International Conference on Advances in Mechanical Engineering � ICAM2010, held at NIT, Surat during 4-6,January 2010.
  • Senthamarai Kannan.C, Ramesh .R �Investigation on the Damping performance of various shapes of Thin walled Carbon/Epoxy Composite Beams�, International Symposium for Research Scholars (ISRS-2010) on Metallurgy, Materials Science and Engineering, Accepted for publication and going to be held at Indian Institute of Technology (IITM) � Chennai During Dec 20 � 22, 2010
  • R Murugan, K. Padmanabhan, R.Ramesh M Rajesh �Hybrid effect on damping behavior of epoxy based woven fabric composites beams�, International conference on Advancements in Polymeric Materials held at CIPET, Chennai During March 25-27, 2011
  • Balaji S, Senthamarai Kannan.C, Ramesh.R �Dynamic analysis of Woven Fabric carbon/Epoxy composite Beams� International conference on Advancements in Polymeric Materials held at CIPET, Chennai During, March 25-27, 2011
  • Madhavan S, Ramesh.R ,Shankar S” Investigation on the Contact Behavior of Rolling Bearing Assembly under Various Tolerance Level” 5thInternational Conference on Advances in. Mechanical. Engineering. (ICAME-2011), held at Natinal Institute of Technology (NIT )Surat, 06 � 08 June 2011.
  • M Prem Ananth, Dr R Ramesh �Analysis of Sliding Behaviour of Non Conformal Contacting Surfaces Subjected to Shear Traction� International Conference on Modelling Optimization and Computing (ICMOC 2012), held at Noorul Islam University, Kumaracoil, 10-11 April 2012.
  • Sathish Kumar R, Dr R Ramesh �Investigation And Analysis of Clutch Disc System Under Dynamic Performance� International Conference on Recent Advances in Mechanical Engineering (INCRAME 2012), held at Dr. M.G.R University, Chennai, 19-20 April 2012.
  • C.Senthamaraikannan, B.Nagarjun , S.Manishankar , Dr.R.Ramesh � Experimental Investigation on the performance of passive damping in rectilinear and curved glass fiber/epoxy composite beams subjected under different boundary conditions.� ESTCON 2012 ( ICCOEE-2012 ), accepted for publication, going to be held at Petronas Technological University-Malaysia from 12th June to 16th June -2012
  • M Prem Ananth, Dr R Ramesh, Tribological Investigation of Nano Composite Coated Titanium Alloy Surfaces Under Unidirectional Sliding , accepted for publication ,3rd International Conference on Manufacturing Science and Technology – ICMST 2012,going to be held at Delhi Auguest 18-19,2012
  • M. S. Kumar, R. Ramesh Structural and contact analysis of automotive leaf spring subjected to dynamic loads using three dimensional finite element approach, , Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012),IIT Delhi,5-8 December,2012
  • R. Murugan, K. Padmanabhan, R. Ramesh Vibration characteristics of thin walled hybrid carbon composite beams under fixed free boundary condition,Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012),IIT Delhi, 5-8 December,2012
  • 24.C. Senthamaraikannan, R. Ramesh, Experimental investigation on modal analysis of carbon fiber reinforced composite beams made up of various cross sectional shapes, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012),IIT Delhi, 5-8 December,2012
  • R Murugan, Dr R Ramesh, Vibration Characteristics of Woven Fabric Glass/Carbon Hybrid Composite Beams using Finite Element Method 3rd International Conference on Recent Advances in Material Processing Technology (RAMPT�13) held at National Engineering College, Kovilpatti Jan 07-09, 2013
  • B.Karthik, M.Prem Ananth, Dr.R.Ramesh, �Tribological Investigation of Titanium Alloy Surfaces under Reciprocating Sliding� has been accepted in the International Conference on Engineering Materials and Process, organized by Tagore Engineering College, Chennai going to held on May-2013.
  • Dinesh Kumar T, Dr. R. Ramesh, �Analysis of Coupled Internal External flow of Aircraft Configuration using Computational Fluid Dynamics�, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
  • Arul Kumar .M, R. Murugan, Dr. R. Ramesh, Dr. K. Padmanabhan, �An Investigation on Static Mechanical properties of epoxy based glass/carbon woven fabric hybrid composites�, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
  • C. Senthamaraikannan, Dr. R. Ramesh, B. Kamesh, �Investigation of Hybrid Carbon Channel Beam under Free Vibration Condition�, IEEE International Conference on Energy Efficient Technologies for Sustainability, (ICEETS 2013), held at St. Xaviers Catholic College of Engineering, April 2013.
  • M.Premananth, Dr. R. Ramesh, Unidirectional sliding wear performance of bilayer PVD coating on modified titanium alloy surface, INTERFINISH-SERIA 2013,Rajalakshmi Engineering College,August 2013.
  • C. Senthamaraikannan, S.K.SharathKumar,Dr. R. Ramesh, � Experimental investigation on Modal response of woven fabric carbon composite plate reinforced with particles of micro rubber blended epoxy matrix under free vibration condtion�, International conference on Recent Advances in Mechanical Engineering and Interdisciplinary developments ,7th & 8th march 2014, held at Ponjesly College of Engineering.
  • R. Murugan, R. Ramesh, K. Padmanabhan, R. Jeyaraam, S. Krishna, �Experimental Investigation on Static Mechanical Properties of Glass/Carbon Hybrid Woven Fabric Composite Laminates� in First International Manufacturing Engineering Conference�� imec2013, organized by the Faculty of Manufacturing Engineering, Universiti Malaysia Pahang� held on�1-3 July 2013�at�Bukit Gambang Resort City, Gambang, Kuantan, Pahang., Malaysia.
  • R. Murugan, R. Ramesh, K. Padmanabhan, S. Sheril, �Investigation on Mechanical Properties of Woven Fabric Glass, Carbon and its Hybrid Laminates made off Different range of Fibre Volume Fraction and Aerial Density� in International Conference on Computational Systems in Engineering and Technology-ICCSET2014, held on 7-8 March 2014 at Sri Venkateswara College of Engineering, Sriperumbudur.
  • R. Murugan, R. Ramesh, K. Padmanabhan, �Investigation on Vibration Behaviour of Cantilever Type Glass/Carbon Hybrid Composite Beams at Higher Frequency Range using Finite Element Method� in International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments – ICRAMID 2014 held on 7-8 March 2014 at Ponjesly College of Engineering, Nagercoil.
  • C. Senthamaraikannan, Dr. R. Ramesh, �Experimental Investigation on Vibration and Modal Response of Woven Carbon Fabric Epoxy Composite Curved Beams of Various fundamental Shapes�, in International Conference on Computational Systems in Engineering and Technology-ICCSET2014, held on 7-8 March 2014 at Sri Venkateswara College of Engineering, Sriperumbudur.
  • M.Anandhi,Dr. R. Ramesh, � Design and Analysis of Vertical axis wind turbine for domestic purpose�, International conference on Recent Advances in Mechanical Engineering and Interdisciplinary developments ,7th & 8th march 2014, held at Ponjesly College of Engineering.
  • V.M. Jothiprakash, M. Prem Ananth, R.Ramesh, �Reciprocating sliding behaviour of Solid Lubricant Coating over modified Titanium Alloy Surfaces�, at Internatinal Conference on Computational Intelligence & Advanced Manufacturing Research (ICCIAMR-2014) haeld at Vels University, Chennai during 2nd & 3rd May,2014
  • L.Radhaswamy, C.Senthamaraikannan, Dr. R. Ramesh, Investigation of the elastic modulus effect on free vibration characteristics of fiber reinforeced polymer composite beams made of various fundamental shapes, International conference on Advance in materials, (ICAM 2014), Shangai, China, 14-15 Decemeber 2014.
  • Arun kumar D, C.Senthamaraikannan, Dr.R.Ramesh,Evaluating forced vibration characteristics of carbon fiber reinforced composite beams of various cross sectional shapes using finite element analysis, International Conference on Polymer Composites, funded by TEQIP Phase-II, December�19th-20th, 2014, National Institute of Technology, NITK Surathkal.
  • Agarshna Murari M, Ashwin Nambi, C.Senthamaraikannan,Dr.R.Ramesh, Experimental Investigation on the Effects of Helically arranged Unconstrained Elastomer Layered Treatment over Structural Steel Beams of Various Cross-section , for Improved Vibration Characteristics, International Conference on Newest Drift in Mechanical Engineering ICNDME -14, 20th – 21st December, 2014�, M. M. University, Mullana (Ambala).

PRESENTATIONS IN NATIONAL CONFERENCES

  • R. Ramesh and R. Gnanamoorthy, Fretting wear behaviour of as received, through hardened En24 steel against bearing steel, Proceedings of 11th National Conference on Machines and Mechanisms, IIT New Delhi, Dec2003, 660-666
  • Ramesh .R, Sutan Kumar K Analysis of rolling contact behavior of CAM-FOLLOWER system using FEM Conferene on Challenges ad innovative practice in Design held at Kalasalingam University during March 12-15,2008.
  • Ramesh .R , Gouthaman.S, C.Senthamaraikannan, �Analysis of Flexible jaw coupling using FEM� National conference on recent trends in Mechanical Engineering held at Pavai Engineering College during24-25 April 2009
  • R.Ramesh, Prem ananth.M �Investigation on the Effect of Roller Follower Material on the Contact Behaviour of Stainless Steel Cam for Automotive Applications Using FEM� at Conference on Tribology of automotive system , held at Indian Institute of Technology � Delhi(IIT D) during 11 �12 Dec. 2009.
  • R.Ramesh, Prem ananth.M �Analysis of Sliding Behavior of Non-Conformal Contacting Surfaces Subjected to Shear Traction�, National Conference on �Advances in Mechanical Engineering� – AIM ENGG 2011, Accepted for publication going to be held at Manipal Institute of Technology(MIT), Manipal , During 03 � 05th Jan, 2011
  • R Murugan,R.Ramesh B.Perumal�Effect of Damping behavior on Fatigue characteristics of modified FRP Laminates�Advances in Mechanical Engineering – AIM ENGG 2011, held at Manipal Institute of Technology(MIT), Manipal , During 03 � 05th Jan, 2011
  • K. Subramani, R.Ramesh, Amarprakash, �Simulation of high velocity impact on composite targets using advanced computational techniques� National Conference onRecent trends in Mechanical engineering-RTME2011, March 25-26 held at GKM college of engineering and technology,Chennai.
  • Sudeep Ambare, Sujay Suresh, R. Ramesh �Design and fabrication of electric vehicle for the differently abled�, National Conference on Recent perspectives in Mechanical Engineering (REPMEC-2011) April 1-2 2011 held at Sri Venkateswara College of Engineering, sriperumbudur .
  • Shiva Kumar M, Dr R Ramesh �Static Contact Analysis of Semi Elliptic Leaf Spring using 3D FEM �Conference on Mechanical Engineering and Technology (COMET 2012), held at IT-BHU, Varanasi, 02-04 March 2012.(Awarded best paper in the conference)
  • P Anand Kannan, R Murugan, Dr R Ramesh �Design & Development of Fatigue Testing Facility For Investigating The Behavior of Hybrid Composite� National Conference on Recent Trends in Mechanical Engineering (NCRTIME 2012), held at Saveetha University, Chennai, 22 March 2012. (Awarded best paper in the conference)
  • B Umamaheswaran, C Senthamarai Kannan, Dr R Ramesh �Investigation on Structural Beams Made Up of Hybrid Carbon Composites� National Conference on Polymers & Composites in Medicine, Engineering and Defence (PCMED 2012), held at Velammal Engineering College, Chennai, 24 March 2012.
  • Sravan Kumar Josyula, R Murugan, Dr R Ramesh �Vibration Characteristics of Modified FRP Laminates� Research Trends in Mechanical Engineering (NCRTME 2012), held at VELS University, Chennai, 10 March 2012
  • Selvaraju P, Premananth M, Dr R Ramesh � Analysis of Sliding Behavior of Coated Surfaces Under Shear Traction� Research Trends in Mechanical Engineering (NCRTME 2012), held at VELS University, Chennai, 10 March 2012
  • G.R.Balaji, Dr.R.Ramesh �Wear and friction characteristics of iron powder sintered with nano sized silicon carbide� National conference on Emerging Trends in Design, Thermal and Manufacturing(ETDTM 2013), held at Saveetha Engineering College, Chennai, April, 2013.
Conference / Workshop / FDP

As coordinator conducted Two day workshop on ?Recent advancements and challenges in design engineering? at SVCE on 04-05 September,2009
UGC sponsored National Workshop on Surface Engineering, conducted by Department of manufacturing engineering, Annamalai University held on April 9-10 2010

Participated and presented paper in the International Conference on Advances in Mechanical Engineering ICAM2010, NIT, Surat held on 4-6, January 2010

Participated and presented paper in the Conference on Tribology of automotive system, IIT-Delhi held on 11-12 Dec 2009
AICTE sponsored National seminar on ?Composite Materials Design Challenges and Opportunities? conducted by Dept. of Mech Engg., K.S. Rangasamy college of TechnologyTiruchengode ,held on 25-26 June2009

Participated and presented paper in the Conference on Design and Manufacturing Issues in Automotive and Allied Industries-IPRoMM-2009, IITM, Chennai, held on 10-11 July 2009

Laboratory Handled
Training Attended
Additional Responsibilities

Machine Shop In-charge
Academic objective member for the Department

Class committee Chairman for IInd year B.E

Project coordinator-M.E (CAD)

Achievements
expand_less
motorchip aiflasksideasketch website toygearbiotechnologydata-complexitypromotioncomputersoftwareweb-design idea-1 creativitymicroscopechemistrymodelassemblyplay-outlined-circular-buttonpausecreative open-bookteamwork-team gaugegoallaboratory mathematicsatommechanicmicroscope-1 factory sketch-1 charitysystempistonscruise envelopefacebook-placeholder-for-locate-places-on-mapssmartphone-callold-typical-phoneuserantennacoding computers-network-interface-symbolsearchgoodwillplay-buttonpause-1 tickleft-arrow